/
usr
/
include
/
openssl
/
Upload File
HOME
/* ssl/ssl.h */ /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) * All rights reserved. * * This package is an SSL implementation written * by Eric Young (eay@cryptsoft.com). * The implementation was written so as to conform with Netscapes SSL. * * This library is free for commercial and non-commercial use as long as * the following conditions are aheared to. The following conditions * apply to all code found in this distribution, be it the RC4, RSA, * lhash, DES, etc., code; not just the SSL code. The SSL documentation * included with this distribution is covered by the same copyright terms * except that the holder is Tim Hudson (tjh@cryptsoft.com). * * Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * "This product includes cryptographic software written by * Eric Young (eay@cryptsoft.com)" * The word 'cryptographic' can be left out if the rouines from the library * being used are not cryptographic related :-). * 4. If you include any Windows specific code (or a derivative thereof) from * the apps directory (application code) you must include an acknowledgement: * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" * * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * The licence and distribution terms for any publically available version or * derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.] */ /* ==================================================================== * Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * openssl-core@openssl.org. * * 5. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.openssl.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft.com). This product includes software written by Tim * Hudson (tjh@cryptsoft.com). * */ /* ==================================================================== * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. * ECC cipher suite support in OpenSSL originally developed by * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project. */ /* ==================================================================== * Copyright 2005 Nokia. All rights reserved. * * The portions of the attached software ("Contribution") is developed by * Nokia Corporation and is licensed pursuant to the OpenSSL open source * license. * * The Contribution, originally written by Mika Kousa and Pasi Eronen of * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites * support (see RFC 4279) to OpenSSL. * * No patent licenses or other rights except those expressly stated in * the OpenSSL open source license shall be deemed granted or received * expressly, by implication, estoppel, or otherwise. * * No assurances are provided by Nokia that the Contribution does not * infringe the patent or other intellectual property rights of any third * party or that the license provides you with all the necessary rights * to make use of the Contribution. * * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR * OTHERWISE. */ #ifndef HEADER_SSL_H # define HEADER_SSL_H # include <openssl/e_os2.h> # ifndef OPENSSL_NO_COMP # include <openssl/comp.h> # endif # ifndef OPENSSL_NO_BIO # include <openssl/bio.h> # endif # ifndef OPENSSL_NO_DEPRECATED # ifndef OPENSSL_NO_X509 # include <openssl/x509.h> # endif # include <openssl/crypto.h> # include <openssl/lhash.h> # include <openssl/buffer.h> # endif # include <openssl/pem.h> # include <openssl/hmac.h> # include <openssl/kssl.h> # include <openssl/safestack.h> # include <openssl/symhacks.h> #ifdef __cplusplus extern "C" { #endif /* SSLeay version number for ASN.1 encoding of the session information */ /*- * Version 0 - initial version * Version 1 - added the optional peer certificate */ # define SSL_SESSION_ASN1_VERSION 0x0001 /* text strings for the ciphers */ # define SSL_TXT_NULL_WITH_MD5 SSL2_TXT_NULL_WITH_MD5 # define SSL_TXT_RC4_128_WITH_MD5 SSL2_TXT_RC4_128_WITH_MD5 # define SSL_TXT_RC4_128_EXPORT40_WITH_MD5 SSL2_TXT_RC4_128_EXPORT40_WITH_MD5 # define SSL_TXT_RC2_128_CBC_WITH_MD5 SSL2_TXT_RC2_128_CBC_WITH_MD5 # define SSL_TXT_RC2_128_CBC_EXPORT40_WITH_MD5 SSL2_TXT_RC2_128_CBC_EXPORT40_WITH_MD5 # define SSL_TXT_IDEA_128_CBC_WITH_MD5 SSL2_TXT_IDEA_128_CBC_WITH_MD5 # define SSL_TXT_DES_64_CBC_WITH_MD5 SSL2_TXT_DES_64_CBC_WITH_MD5 # define SSL_TXT_DES_64_CBC_WITH_SHA SSL2_TXT_DES_64_CBC_WITH_SHA # define SSL_TXT_DES_192_EDE3_CBC_WITH_MD5 SSL2_TXT_DES_192_EDE3_CBC_WITH_MD5 # define SSL_TXT_DES_192_EDE3_CBC_WITH_SHA SSL2_TXT_DES_192_EDE3_CBC_WITH_SHA /* * VRS Additional Kerberos5 entries */ # define SSL_TXT_KRB5_DES_64_CBC_SHA SSL3_TXT_KRB5_DES_64_CBC_SHA # define SSL_TXT_KRB5_DES_192_CBC3_SHA SSL3_TXT_KRB5_DES_192_CBC3_SHA # define SSL_TXT_KRB5_RC4_128_SHA SSL3_TXT_KRB5_RC4_128_SHA # define SSL_TXT_KRB5_IDEA_128_CBC_SHA SSL3_TXT_KRB5_IDEA_128_CBC_SHA # define SSL_TXT_KRB5_DES_64_CBC_MD5 SSL3_TXT_KRB5_DES_64_CBC_MD5 # define SSL_TXT_KRB5_DES_192_CBC3_MD5 SSL3_TXT_KRB5_DES_192_CBC3_MD5 # define SSL_TXT_KRB5_RC4_128_MD5 SSL3_TXT_KRB5_RC4_128_MD5 # define SSL_TXT_KRB5_IDEA_128_CBC_MD5 SSL3_TXT_KRB5_IDEA_128_CBC_MD5 # define SSL_TXT_KRB5_DES_40_CBC_SHA SSL3_TXT_KRB5_DES_40_CBC_SHA # define SSL_TXT_KRB5_RC2_40_CBC_SHA SSL3_TXT_KRB5_RC2_40_CBC_SHA # define SSL_TXT_KRB5_RC4_40_SHA SSL3_TXT_KRB5_RC4_40_SHA # define SSL_TXT_KRB5_DES_40_CBC_MD5 SSL3_TXT_KRB5_DES_40_CBC_MD5 # define SSL_TXT_KRB5_RC2_40_CBC_MD5 SSL3_TXT_KRB5_RC2_40_CBC_MD5 # define SSL_TXT_KRB5_RC4_40_MD5 SSL3_TXT_KRB5_RC4_40_MD5 # define SSL_TXT_KRB5_DES_40_CBC_SHA SSL3_TXT_KRB5_DES_40_CBC_SHA # define SSL_TXT_KRB5_DES_40_CBC_MD5 SSL3_TXT_KRB5_DES_40_CBC_MD5 # define SSL_TXT_KRB5_DES_64_CBC_SHA SSL3_TXT_KRB5_DES_64_CBC_SHA # define SSL_TXT_KRB5_DES_64_CBC_MD5 SSL3_TXT_KRB5_DES_64_CBC_MD5 # define SSL_TXT_KRB5_DES_192_CBC3_SHA SSL3_TXT_KRB5_DES_192_CBC3_SHA # define SSL_TXT_KRB5_DES_192_CBC3_MD5 SSL3_TXT_KRB5_DES_192_CBC3_MD5 # define SSL_MAX_KRB5_PRINCIPAL_LENGTH 256 # define SSL_MAX_SSL_SESSION_ID_LENGTH 32 # define SSL_MAX_SID_CTX_LENGTH 32 # define SSL_MIN_RSA_MODULUS_LENGTH_IN_BYTES (512/8) # define SSL_MAX_KEY_ARG_LENGTH 8 # define SSL_MAX_MASTER_KEY_LENGTH 48 /* These are used to specify which ciphers to use and not to use */ # define SSL_TXT_EXP40 "EXPORT40" # define SSL_TXT_EXP56 "EXPORT56" # define SSL_TXT_LOW "LOW" # define SSL_TXT_MEDIUM "MEDIUM" # define SSL_TXT_HIGH "HIGH" # define SSL_TXT_FIPS "FIPS" # define SSL_TXT_kFZA "kFZA"/* unused! */ # define SSL_TXT_aFZA "aFZA"/* unused! */ # define SSL_TXT_eFZA "eFZA"/* unused! */ # define SSL_TXT_FZA "FZA"/* unused! */ # define SSL_TXT_aNULL "aNULL" # define SSL_TXT_eNULL "eNULL" # define SSL_TXT_NULL "NULL" # define SSL_TXT_kRSA "kRSA" # define SSL_TXT_kDHr "kDHr" # define SSL_TXT_kDHd "kDHd" # define SSL_TXT_kDH "kDH" # define SSL_TXT_kEDH "kEDH" # define SSL_TXT_kDHE "kDHE"/* alias for kEDH */ # define SSL_TXT_kKRB5 "kKRB5" # define SSL_TXT_kECDHr "kECDHr" # define SSL_TXT_kECDHe "kECDHe" # define SSL_TXT_kECDH "kECDH" # define SSL_TXT_kEECDH "kEECDH" # define SSL_TXT_kECDHE "kECDHE"/* alias for kEECDH */ # define SSL_TXT_kPSK "kPSK" # define SSL_TXT_kGOST "kGOST" # define SSL_TXT_kSRP "kSRP" # define SSL_TXT_aRSA "aRSA" # define SSL_TXT_aDSS "aDSS" # define SSL_TXT_aDH "aDH" # define SSL_TXT_aECDH "aECDH" # define SSL_TXT_aKRB5 "aKRB5" # define SSL_TXT_aECDSA "aECDSA" # define SSL_TXT_aPSK "aPSK" # define SSL_TXT_aGOST94 "aGOST94" # define SSL_TXT_aGOST01 "aGOST01" # define SSL_TXT_aGOST "aGOST" # define SSL_TXT_aSRP "aSRP" # define SSL_TXT_DSS "DSS" # define SSL_TXT_DH "DH" # define SSL_TXT_EDH "EDH"/* same as "kEDH:-ADH" */ # define SSL_TXT_DHE "DHE"/* alias for EDH */ # define SSL_TXT_ADH "ADH" # define SSL_TXT_RSA "RSA" # define SSL_TXT_ECDH "ECDH" # define SSL_TXT_EECDH "EECDH"/* same as "kEECDH:-AECDH" */ # define SSL_TXT_ECDHE "ECDHE"/* alias for ECDHE" */ # define SSL_TXT_AECDH "AECDH" # define SSL_TXT_ECDSA "ECDSA" # define SSL_TXT_KRB5 "KRB5" # define SSL_TXT_PSK "PSK" # define SSL_TXT_SRP "SRP" # define SSL_TXT_DES "DES" # define SSL_TXT_3DES "3DES" # define SSL_TXT_RC4 "RC4" # define SSL_TXT_RC2 "RC2" # define SSL_TXT_IDEA "IDEA" # define SSL_TXT_SEED "SEED" # define SSL_TXT_AES128 "AES128" # define SSL_TXT_AES256 "AES256" # define SSL_TXT_AES "AES" # define SSL_TXT_AES_GCM "AESGCM" # define SSL_TXT_CAMELLIA128 "CAMELLIA128" # define SSL_TXT_CAMELLIA256 "CAMELLIA256" # define SSL_TXT_CAMELLIA "CAMELLIA" # define SSL_TXT_MD5 "MD5" # define SSL_TXT_SHA1 "SHA1" # define SSL_TXT_SHA "SHA"/* same as "SHA1" */ # define SSL_TXT_GOST94 "GOST94" # define SSL_TXT_GOST89MAC "GOST89MAC" # define SSL_TXT_SHA256 "SHA256" # define SSL_TXT_SHA384 "SHA384" # define SSL_TXT_SSLV2 "SSLv2" # define SSL_TXT_SSLV3 "SSLv3" # define SSL_TXT_TLSV1 "TLSv1" # define SSL_TXT_TLSV1_1 "TLSv1.1" # define SSL_TXT_TLSV1_2 "TLSv1.2" # define SSL_TXT_EXP "EXP" # define SSL_TXT_EXPORT "EXPORT" # define SSL_TXT_ALL "ALL" /*- * COMPLEMENTOF* definitions. These identifiers are used to (de-select) * ciphers normally not being used. * Example: "RC4" will activate all ciphers using RC4 including ciphers * without authentication, which would normally disabled by DEFAULT (due * the "!ADH" being part of default). Therefore "RC4:!COMPLEMENTOFDEFAULT" * will make sure that it is also disabled in the specific selection. * COMPLEMENTOF* identifiers are portable between version, as adjustments * to the default cipher setup will also be included here. * * COMPLEMENTOFDEFAULT does not experience the same special treatment that * DEFAULT gets, as only selection is being done and no sorting as needed * for DEFAULT. */ # define SSL_TXT_CMPALL "COMPLEMENTOFALL" # define SSL_TXT_CMPDEF "COMPLEMENTOFDEFAULT" /* * The following cipher list is used by default. It also is substituted when * an application-defined cipher list string starts with 'DEFAULT'. */ # define SSL_DEFAULT_CIPHER_LIST "ALL:!EXPORT:!LOW:!aNULL:!eNULL:!SSLv2" /* * As of OpenSSL 1.0.0, ssl_create_cipher_list() in ssl/ssl_ciph.c always * starts with a reasonable order, and all we have to do for DEFAULT is * throwing out anonymous and unencrypted ciphersuites! (The latter are not * actually enabled by ALL, but "ALL:RSA" would enable some of them.) */ /* Used in SSL_set_shutdown()/SSL_get_shutdown(); */ # define SSL_SENT_SHUTDOWN 1 # define SSL_RECEIVED_SHUTDOWN 2 #ifdef __cplusplus } #endif #ifdef __cplusplus extern "C" { #endif # if (defined(OPENSSL_NO_RSA) || defined(OPENSSL_NO_MD5)) && !defined(OPENSSL_NO_SSL2) # define OPENSSL_NO_SSL2 # endif # define SSL_FILETYPE_ASN1 X509_FILETYPE_ASN1 # define SSL_FILETYPE_PEM X509_FILETYPE_PEM /* * This is needed to stop compilers complaining about the 'struct ssl_st *' * function parameters used to prototype callbacks in SSL_CTX. */ typedef struct ssl_st *ssl_crock_st; typedef struct tls_session_ticket_ext_st TLS_SESSION_TICKET_EXT; typedef struct ssl_method_st SSL_METHOD; typedef struct ssl_cipher_st SSL_CIPHER; typedef struct ssl_session_st SSL_SESSION; typedef struct tls_sigalgs_st TLS_SIGALGS; typedef struct ssl_conf_ctx_st SSL_CONF_CTX; DECLARE_STACK_OF(SSL_CIPHER) /* SRTP protection profiles for use with the use_srtp extension (RFC 5764)*/ typedef struct srtp_protection_profile_st { const char *name; unsigned long id; } SRTP_PROTECTION_PROFILE; DECLARE_STACK_OF(SRTP_PROTECTION_PROFILE) typedef int (*tls_session_ticket_ext_cb_fn) (SSL *s, const unsigned char *data, int len, void *arg); typedef int (*tls_session_secret_cb_fn) (SSL *s, void *secret, int *secret_len, STACK_OF(SSL_CIPHER) *peer_ciphers, SSL_CIPHER **cipher, void *arg); # ifndef OPENSSL_NO_TLSEXT /* Typedefs for handling custom extensions */ typedef int (*custom_ext_add_cb) (SSL *s, unsigned int ext_type, const unsigned char **out, size_t *outlen, int *al, void *add_arg); typedef void (*custom_ext_free_cb) (SSL *s, unsigned int ext_type, const unsigned char *out, void *add_arg); typedef int (*custom_ext_parse_cb) (SSL *s, unsigned int ext_type, const unsigned char *in, size_t inlen, int *al, void *parse_arg); # endif # ifndef OPENSSL_NO_SSL_INTERN /* used to hold info on the particular ciphers used */ struct ssl_cipher_st { int valid; const char *name; /* text name */ unsigned long id; /* id, 4 bytes, first is version */ /* * changed in 0.9.9: these four used to be portions of a single value * 'algorithms' */ unsigned long algorithm_mkey; /* key exchange algorithm */ unsigned long algorithm_auth; /* server authentication */ unsigned long algorithm_enc; /* symmetric encryption */ unsigned long algorithm_mac; /* symmetric authentication */ unsigned long algorithm_ssl; /* (major) protocol version */ unsigned long algo_strength; /* strength and export flags */ unsigned long algorithm2; /* Extra flags */ int strength_bits; /* Number of bits really used */ int alg_bits; /* Number of bits for algorithm */ }; /* Used to hold functions for SSLv2 or SSLv3/TLSv1 functions */ struct ssl_method_st { int version; int (*ssl_new) (SSL *s); void (*ssl_clear) (SSL *s); void (*ssl_free) (SSL *s); int (*ssl_accept) (SSL *s); int (*ssl_connect) (SSL *s); int (*ssl_read) (SSL *s, void *buf, int len); int (*ssl_peek) (SSL *s, void *buf, int len); int (*ssl_write) (SSL *s, const void *buf, int len); int (*ssl_shutdown) (SSL *s); int (*ssl_renegotiate) (SSL *s); int (*ssl_renegotiate_check) (SSL *s); long (*ssl_get_message) (SSL *s, int st1, int stn, int mt, long max, int *ok); int (*ssl_read_bytes) (SSL *s, int type, unsigned char *buf, int len, int peek); int (*ssl_write_bytes) (SSL *s, int type, const void *buf_, int len); int (*ssl_dispatch_alert) (SSL *s); long (*ssl_ctrl) (SSL *s, int cmd, long larg, void *parg); long (*ssl_ctx_ctrl) (SSL_CTX *ctx, int cmd, long larg, void *parg); const SSL_CIPHER *(*get_cipher_by_char) (const unsigned char *ptr); int (*put_cipher_by_char) (const SSL_CIPHER *cipher, unsigned char *ptr); int (*ssl_pending) (const SSL *s); int (*num_ciphers) (void); const SSL_CIPHER *(*get_cipher) (unsigned ncipher); const struct ssl_method_st *(*get_ssl_method) (int version); long (*get_timeout) (void); struct ssl3_enc_method *ssl3_enc; /* Extra SSLv3/TLS stuff */ int (*ssl_version) (void); long (*ssl_callback_ctrl) (SSL *s, int cb_id, void (*fp) (void)); long (*ssl_ctx_callback_ctrl) (SSL_CTX *s, int cb_id, void (*fp) (void)); }; /*- * Lets make this into an ASN.1 type structure as follows * SSL_SESSION_ID ::= SEQUENCE { * version INTEGER, -- structure version number * SSLversion INTEGER, -- SSL version number * Cipher OCTET STRING, -- the 3 byte cipher ID * Session_ID OCTET STRING, -- the Session ID * Master_key OCTET STRING, -- the master key * KRB5_principal OCTET STRING -- optional Kerberos principal * Key_Arg [ 0 ] IMPLICIT OCTET STRING, -- the optional Key argument * Time [ 1 ] EXPLICIT INTEGER, -- optional Start Time * Timeout [ 2 ] EXPLICIT INTEGER, -- optional Timeout ins seconds * Peer [ 3 ] EXPLICIT X509, -- optional Peer Certificate * Session_ID_context [ 4 ] EXPLICIT OCTET STRING, -- the Session ID context * Verify_result [ 5 ] EXPLICIT INTEGER, -- X509_V_... code for `Peer' * HostName [ 6 ] EXPLICIT OCTET STRING, -- optional HostName from servername TLS extension * PSK_identity_hint [ 7 ] EXPLICIT OCTET STRING, -- optional PSK identity hint * PSK_identity [ 8 ] EXPLICIT OCTET STRING, -- optional PSK identity * Ticket_lifetime_hint [9] EXPLICIT INTEGER, -- server's lifetime hint for session ticket * Ticket [10] EXPLICIT OCTET STRING, -- session ticket (clients only) * Compression_meth [11] EXPLICIT OCTET STRING, -- optional compression method * SRP_username [ 12 ] EXPLICIT OCTET STRING -- optional SRP username * } * Look in ssl/ssl_asn1.c for more details * I'm using EXPLICIT tags so I can read the damn things using asn1parse :-). */ struct ssl_session_st { int ssl_version; /* what ssl version session info is being * kept in here? */ /* only really used in SSLv2 */ unsigned int key_arg_length; unsigned char key_arg[SSL_MAX_KEY_ARG_LENGTH]; int master_key_length; unsigned char master_key[SSL_MAX_MASTER_KEY_LENGTH]; /* session_id - valid? */ unsigned int session_id_length; unsigned char session_id[SSL_MAX_SSL_SESSION_ID_LENGTH]; /* * this is used to determine whether the session is being reused in the * appropriate context. It is up to the application to set this, via * SSL_new */ unsigned int sid_ctx_length; unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; # ifndef OPENSSL_NO_KRB5 unsigned int krb5_client_princ_len; unsigned char krb5_client_princ[SSL_MAX_KRB5_PRINCIPAL_LENGTH]; # endif /* OPENSSL_NO_KRB5 */ # ifndef OPENSSL_NO_PSK char *psk_identity_hint; char *psk_identity; # endif /* * Used to indicate that session resumption is not allowed. Applications * can also set this bit for a new session via not_resumable_session_cb * to disable session caching and tickets. */ int not_resumable; /* The cert is the certificate used to establish this connection */ struct sess_cert_st /* SESS_CERT */ *sess_cert; /* * This is the cert for the other end. On clients, it will be the same as * sess_cert->peer_key->x509 (the latter is not enough as sess_cert is * not retained in the external representation of sessions, see * ssl_asn1.c). */ X509 *peer; /* * when app_verify_callback accepts a session where the peer's * certificate is not ok, we must remember the error for session reuse: */ long verify_result; /* only for servers */ int references; long timeout; long time; unsigned int compress_meth; /* Need to lookup the method */ const SSL_CIPHER *cipher; unsigned long cipher_id; /* when ASN.1 loaded, this needs to be used * to load the 'cipher' structure */ STACK_OF(SSL_CIPHER) *ciphers; /* shared ciphers? */ CRYPTO_EX_DATA ex_data; /* application specific data */ /* * These are used to make removal of session-ids more efficient and to * implement a maximum cache size. */ struct ssl_session_st *prev, *next; # ifndef OPENSSL_NO_TLSEXT char *tlsext_hostname; # ifndef OPENSSL_NO_EC size_t tlsext_ecpointformatlist_length; unsigned char *tlsext_ecpointformatlist; /* peer's list */ size_t tlsext_ellipticcurvelist_length; unsigned char *tlsext_ellipticcurvelist; /* peer's list */ # endif /* OPENSSL_NO_EC */ /* RFC4507 info */ unsigned char *tlsext_tick; /* Session ticket */ size_t tlsext_ticklen; /* Session ticket length */ long tlsext_tick_lifetime_hint; /* Session lifetime hint in seconds */ # endif }; # endif # define SSL_OP_MICROSOFT_SESS_ID_BUG 0x00000001L # define SSL_OP_NETSCAPE_CHALLENGE_BUG 0x00000002L /* Allow initial connection to servers that don't support RI */ # define SSL_OP_LEGACY_SERVER_CONNECT 0x00000004L # define SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG 0x00000008L # define SSL_OP_TLSEXT_PADDING 0x00000010L # define SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER 0x00000020L # define SSL_OP_SAFARI_ECDHE_ECDSA_BUG 0x00000040L # define SSL_OP_SSLEAY_080_CLIENT_DH_BUG 0x00000080L # define SSL_OP_TLS_D5_BUG 0x00000100L # define SSL_OP_TLS_BLOCK_PADDING_BUG 0x00000200L /* Hasn't done anything since OpenSSL 0.9.7h, retained for compatibility */ # define SSL_OP_MSIE_SSLV2_RSA_PADDING 0x0 /* Refers to ancient SSLREF and SSLv2, retained for compatibility */ # define SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG 0x0 /* * Disable SSL 3.0/TLS 1.0 CBC vulnerability workaround that was added in * OpenSSL 0.9.6d. Usually (depending on the application protocol) the * workaround is not needed. Unfortunately some broken SSL/TLS * implementations cannot handle it at all, which is why we include it in * SSL_OP_ALL. */ /* added in 0.9.6e */ # define SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS 0x00000800L /* * SSL_OP_ALL: various bug workarounds that should be rather harmless. This * used to be 0x000FFFFFL before 0.9.7. */ # define SSL_OP_ALL 0x80000BFFL /* DTLS options */ # define SSL_OP_NO_QUERY_MTU 0x00001000L /* Turn on Cookie Exchange (on relevant for servers) */ # define SSL_OP_COOKIE_EXCHANGE 0x00002000L /* Don't use RFC4507 ticket extension */ # define SSL_OP_NO_TICKET 0x00004000L /* Use Cisco's "speshul" version of DTLS_BAD_VER (as client) */ # define SSL_OP_CISCO_ANYCONNECT 0x00008000L /* As server, disallow session resumption on renegotiation */ # define SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION 0x00010000L /* Don't use compression even if supported */ # define SSL_OP_NO_COMPRESSION 0x00020000L /* Permit unsafe legacy renegotiation */ # define SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION 0x00040000L /* If set, always create a new key when using tmp_ecdh parameters */ # define SSL_OP_SINGLE_ECDH_USE 0x00080000L /* Does nothing: retained for compatibility */ # define SSL_OP_SINGLE_DH_USE 0x00100000L /* Does nothing: retained for compatibiity */ # define SSL_OP_EPHEMERAL_RSA 0x0 /* * Set on servers to choose the cipher according to the server's preferences */ # define SSL_OP_CIPHER_SERVER_PREFERENCE 0x00400000L /* * If set, a server will allow a client to issue a SSLv3.0 version number as * latest version supported in the premaster secret, even when TLSv1.0 * (version 3.1) was announced in the client hello. Normally this is * forbidden to prevent version rollback attacks. */ # define SSL_OP_TLS_ROLLBACK_BUG 0x00800000L # define SSL_OP_NO_SSLv2 0x01000000L # define SSL_OP_NO_SSLv3 0x02000000L # define SSL_OP_NO_TLSv1 0x04000000L # define SSL_OP_NO_TLSv1_2 0x08000000L # define SSL_OP_NO_TLSv1_1 0x10000000L # define SSL_OP_NO_DTLSv1 0x04000000L # define SSL_OP_NO_DTLSv1_2 0x08000000L # define SSL_OP_NO_SSL_MASK (SSL_OP_NO_SSLv2|SSL_OP_NO_SSLv3|\ SSL_OP_NO_TLSv1|SSL_OP_NO_TLSv1_1|SSL_OP_NO_TLSv1_2) /* * These next two were never actually used for anything since SSLeay zap so * we have some more flags. */ /* * The next flag deliberately changes the ciphertest, this is a check for the * PKCS#1 attack */ # define SSL_OP_PKCS1_CHECK_1 0x0 # define SSL_OP_PKCS1_CHECK_2 0x0 # define SSL_OP_NETSCAPE_CA_DN_BUG 0x20000000L # define SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG 0x40000000L /* * Make server add server-hello extension from early version of cryptopro * draft, when GOST ciphersuite is negotiated. Required for interoperability * with CryptoPro CSP 3.x */ # define SSL_OP_CRYPTOPRO_TLSEXT_BUG 0x80000000L /* * Allow SSL_write(..., n) to return r with 0 < r < n (i.e. report success * when just a single record has been written): */ # define SSL_MODE_ENABLE_PARTIAL_WRITE 0x00000001L /* * Make it possible to retry SSL_write() with changed buffer location (buffer * contents must stay the same!); this is not the default to avoid the * misconception that non-blocking SSL_write() behaves like non-blocking * write(): */ # define SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER 0x00000002L /* * Never bother the application with retries if the transport is blocking: */ # define SSL_MODE_AUTO_RETRY 0x00000004L /* Don't attempt to automatically build certificate chain */ # define SSL_MODE_NO_AUTO_CHAIN 0x00000008L /* * Save RAM by releasing read and write buffers when they're empty. (SSL3 and * TLS only.) "Released" buffers are put onto a free-list in the context or * just freed (depending on the context's setting for freelist_max_len). */ # define SSL_MODE_RELEASE_BUFFERS 0x00000010L /* * Send the current time in the Random fields of the ClientHello and * ServerHello records for compatibility with hypothetical implementations * that require it. */ # define SSL_MODE_SEND_CLIENTHELLO_TIME 0x00000020L # define SSL_MODE_SEND_SERVERHELLO_TIME 0x00000040L /* * Send TLS_FALLBACK_SCSV in the ClientHello. To be set only by applications * that reconnect with a downgraded protocol version; see * draft-ietf-tls-downgrade-scsv-00 for details. DO NOT ENABLE THIS if your * application attempts a normal handshake. Only use this in explicit * fallback retries, following the guidance in * draft-ietf-tls-downgrade-scsv-00. */ # define SSL_MODE_SEND_FALLBACK_SCSV 0x00000080L /* Cert related flags */ /* * Many implementations ignore some aspects of the TLS standards such as * enforcing certifcate chain algorithms. When this is set we enforce them. */ # define SSL_CERT_FLAG_TLS_STRICT 0x00000001L /* Suite B modes, takes same values as certificate verify flags */ # define SSL_CERT_FLAG_SUITEB_128_LOS_ONLY 0x10000 /* Suite B 192 bit only mode */ # define SSL_CERT_FLAG_SUITEB_192_LOS 0x20000 /* Suite B 128 bit mode allowing 192 bit algorithms */ # define SSL_CERT_FLAG_SUITEB_128_LOS 0x30000 /* Perform all sorts of protocol violations for testing purposes */ # define SSL_CERT_FLAG_BROKEN_PROTOCOL 0x10000000 /* Flags for building certificate chains */ /* Treat any existing certificates as untrusted CAs */ # define SSL_BUILD_CHAIN_FLAG_UNTRUSTED 0x1 /* Don't include root CA in chain */ # define SSL_BUILD_CHAIN_FLAG_NO_ROOT 0x2 /* Just check certificates already there */ # define SSL_BUILD_CHAIN_FLAG_CHECK 0x4 /* Ignore verification errors */ # define SSL_BUILD_CHAIN_FLAG_IGNORE_ERROR 0x8 /* Clear verification errors from queue */ # define SSL_BUILD_CHAIN_FLAG_CLEAR_ERROR 0x10 /* Flags returned by SSL_check_chain */ /* Certificate can be used with this session */ # define CERT_PKEY_VALID 0x1 /* Certificate can also be used for signing */ # define CERT_PKEY_SIGN 0x2 /* EE certificate signing algorithm OK */ # define CERT_PKEY_EE_SIGNATURE 0x10 /* CA signature algorithms OK */ # define CERT_PKEY_CA_SIGNATURE 0x20 /* EE certificate parameters OK */ # define CERT_PKEY_EE_PARAM 0x40 /* CA certificate parameters OK */ # define CERT_PKEY_CA_PARAM 0x80 /* Signing explicitly allowed as opposed to SHA1 fallback */ # define CERT_PKEY_EXPLICIT_SIGN 0x100 /* Client CA issuer names match (always set for server cert) */ # define CERT_PKEY_ISSUER_NAME 0x200 /* Cert type matches client types (always set for server cert) */ # define CERT_PKEY_CERT_TYPE 0x400 /* Cert chain suitable to Suite B */ # define CERT_PKEY_SUITEB 0x800 # define SSL_CONF_FLAG_CMDLINE 0x1 # define SSL_CONF_FLAG_FILE 0x2 # define SSL_CONF_FLAG_CLIENT 0x4 # define SSL_CONF_FLAG_SERVER 0x8 # define SSL_CONF_FLAG_SHOW_ERRORS 0x10 # define SSL_CONF_FLAG_CERTIFICATE 0x20 /* Configuration value types */ # define SSL_CONF_TYPE_UNKNOWN 0x0 # define SSL_CONF_TYPE_STRING 0x1 # define SSL_CONF_TYPE_FILE 0x2 # define SSL_CONF_TYPE_DIR 0x3 /* * Note: SSL[_CTX]_set_{options,mode} use |= op on the previous value, they * cannot be used to clear bits. */ # define SSL_CTX_set_options(ctx,op) \ SSL_CTX_ctrl((ctx),SSL_CTRL_OPTIONS,(op),NULL) # define SSL_CTX_clear_options(ctx,op) \ SSL_CTX_ctrl((ctx),SSL_CTRL_CLEAR_OPTIONS,(op),NULL) # define SSL_CTX_get_options(ctx) \ SSL_CTX_ctrl((ctx),SSL_CTRL_OPTIONS,0,NULL) # define SSL_set_options(ssl,op) \ SSL_ctrl((ssl),SSL_CTRL_OPTIONS,(op),NULL) # define SSL_clear_options(ssl,op) \ SSL_ctrl((ssl),SSL_CTRL_CLEAR_OPTIONS,(op),NULL) # define SSL_get_options(ssl) \ SSL_ctrl((ssl),SSL_CTRL_OPTIONS,0,NULL) # define SSL_CTX_set_mode(ctx,op) \ SSL_CTX_ctrl((ctx),SSL_CTRL_MODE,(op),NULL) # define SSL_CTX_clear_mode(ctx,op) \ SSL_CTX_ctrl((ctx),SSL_CTRL_CLEAR_MODE,(op),NULL) # define SSL_CTX_get_mode(ctx) \ SSL_CTX_ctrl((ctx),SSL_CTRL_MODE,0,NULL) # define SSL_clear_mode(ssl,op) \ SSL_ctrl((ssl),SSL_CTRL_CLEAR_MODE,(op),NULL) # define SSL_set_mode(ssl,op) \ SSL_ctrl((ssl),SSL_CTRL_MODE,(op),NULL) # define SSL_get_mode(ssl) \ SSL_ctrl((ssl),SSL_CTRL_MODE,0,NULL) # define SSL_set_mtu(ssl, mtu) \ SSL_ctrl((ssl),SSL_CTRL_SET_MTU,(mtu),NULL) # define DTLS_set_link_mtu(ssl, mtu) \ SSL_ctrl((ssl),DTLS_CTRL_SET_LINK_MTU,(mtu),NULL) # define DTLS_get_link_min_mtu(ssl) \ SSL_ctrl((ssl),DTLS_CTRL_GET_LINK_MIN_MTU,0,NULL) # define SSL_get_secure_renegotiation_support(ssl) \ SSL_ctrl((ssl), SSL_CTRL_GET_RI_SUPPORT, 0, NULL) # ifndef OPENSSL_NO_HEARTBEATS # define SSL_heartbeat(ssl) \ SSL_ctrl((ssl),SSL_CTRL_TLS_EXT_SEND_HEARTBEAT,0,NULL) # endif # define SSL_CTX_set_cert_flags(ctx,op) \ SSL_CTX_ctrl((ctx),SSL_CTRL_CERT_FLAGS,(op),NULL) # define SSL_set_cert_flags(s,op) \ SSL_ctrl((s),SSL_CTRL_CERT_FLAGS,(op),NULL) # define SSL_CTX_clear_cert_flags(ctx,op) \ SSL_CTX_ctrl((ctx),SSL_CTRL_CLEAR_CERT_FLAGS,(op),NULL) # define SSL_clear_cert_flags(s,op) \ SSL_ctrl((s),SSL_CTRL_CLEAR_CERT_FLAGS,(op),NULL) void SSL_CTX_set_msg_callback(SSL_CTX *ctx, void (*cb) (int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg)); void SSL_set_msg_callback(SSL *ssl, void (*cb) (int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg)); # define SSL_CTX_set_msg_callback_arg(ctx, arg) SSL_CTX_ctrl((ctx), SSL_CTRL_SET_MSG_CALLBACK_ARG, 0, (arg)) # define SSL_set_msg_callback_arg(ssl, arg) SSL_ctrl((ssl), SSL_CTRL_SET_MSG_CALLBACK_ARG, 0, (arg)) # if defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_WIN32) # define SSL_MAX_CERT_LIST_DEFAULT 1024*30 /* 30k max cert list :-) */ # else # define SSL_MAX_CERT_LIST_DEFAULT 1024*100 /* 100k max cert list :-) */ # endif # define SSL_SESSION_CACHE_MAX_SIZE_DEFAULT (1024*20) /* * This callback type is used inside SSL_CTX, SSL, and in the functions that * set them. It is used to override the generation of SSL/TLS session IDs in * a server. Return value should be zero on an error, non-zero to proceed. * Also, callbacks should themselves check if the id they generate is unique * otherwise the SSL handshake will fail with an error - callbacks can do * this using the 'ssl' value they're passed by; * SSL_has_matching_session_id(ssl, id, *id_len) The length value passed in * is set at the maximum size the session ID can be. In SSLv2 this is 16 * bytes, whereas SSLv3/TLSv1 it is 32 bytes. The callback can alter this * length to be less if desired, but under SSLv2 session IDs are supposed to * be fixed at 16 bytes so the id will be padded after the callback returns * in this case. It is also an error for the callback to set the size to * zero. */ typedef int (*GEN_SESSION_CB) (const SSL *ssl, unsigned char *id, unsigned int *id_len); typedef struct ssl_comp_st SSL_COMP; # ifndef OPENSSL_NO_SSL_INTERN struct ssl_comp_st { int id; const char *name; # ifndef OPENSSL_NO_COMP COMP_METHOD *method; # else char *method; # endif }; DECLARE_STACK_OF(SSL_COMP) DECLARE_LHASH_OF(SSL_SESSION); struct ssl_ctx_st { const SSL_METHOD *method; STACK_OF(SSL_CIPHER) *cipher_list; /* same as above but sorted for lookup */ STACK_OF(SSL_CIPHER) *cipher_list_by_id; struct x509_store_st /* X509_STORE */ *cert_store; LHASH_OF(SSL_SESSION) *sessions; /* * Most session-ids that will be cached, default is * SSL_SESSION_CACHE_MAX_SIZE_DEFAULT. 0 is unlimited. */ unsigned long session_cache_size; struct ssl_session_st *session_cache_head; struct ssl_session_st *session_cache_tail; /* * This can have one of 2 values, ored together, SSL_SESS_CACHE_CLIENT, * SSL_SESS_CACHE_SERVER, Default is SSL_SESSION_CACHE_SERVER, which * means only SSL_accept which cache SSL_SESSIONS. */ int session_cache_mode; /* * If timeout is not 0, it is the default timeout value set when * SSL_new() is called. This has been put in to make life easier to set * things up */ long session_timeout; /* * If this callback is not null, it will be called each time a session id * is added to the cache. If this function returns 1, it means that the * callback will do a SSL_SESSION_free() when it has finished using it. * Otherwise, on 0, it means the callback has finished with it. If * remove_session_cb is not null, it will be called when a session-id is * removed from the cache. After the call, OpenSSL will * SSL_SESSION_free() it. */ int (*new_session_cb) (struct ssl_st *ssl, SSL_SESSION *sess); void (*remove_session_cb) (struct ssl_ctx_st *ctx, SSL_SESSION *sess); SSL_SESSION *(*get_session_cb) (struct ssl_st *ssl, unsigned char *data, int len, int *copy); struct { int sess_connect; /* SSL new conn - started */ int sess_connect_renegotiate; /* SSL reneg - requested */ int sess_connect_good; /* SSL new conne/reneg - finished */ int sess_accept; /* SSL new accept - started */ int sess_accept_renegotiate; /* SSL reneg - requested */ int sess_accept_good; /* SSL accept/reneg - finished */ int sess_miss; /* session lookup misses */ int sess_timeout; /* reuse attempt on timeouted session */ int sess_cache_full; /* session removed due to full cache */ int sess_hit; /* session reuse actually done */ int sess_cb_hit; /* session-id that was not in the cache was * passed back via the callback. This * indicates that the application is * supplying session-id's from other * processes - spooky :-) */ } stats; int references; /* if defined, these override the X509_verify_cert() calls */ int (*app_verify_callback) (X509_STORE_CTX *, void *); void *app_verify_arg; /* * before OpenSSL 0.9.7, 'app_verify_arg' was ignored * ('app_verify_callback' was called with just one argument) */ /* Default password callback. */ pem_password_cb *default_passwd_callback; /* Default password callback user data. */ void *default_passwd_callback_userdata; /* get client cert callback */ int (*client_cert_cb) (SSL *ssl, X509 **x509, EVP_PKEY **pkey); /* cookie generate callback */ int (*app_gen_cookie_cb) (SSL *ssl, unsigned char *cookie, unsigned int *cookie_len); /* verify cookie callback */ int (*app_verify_cookie_cb) (SSL *ssl, unsigned char *cookie, unsigned int cookie_len); CRYPTO_EX_DATA ex_data; const EVP_MD *rsa_md5; /* For SSLv2 - name is 'ssl2-md5' */ const EVP_MD *md5; /* For SSLv3/TLSv1 'ssl3-md5' */ const EVP_MD *sha1; /* For SSLv3/TLSv1 'ssl3->sha1' */ STACK_OF(X509) *extra_certs; STACK_OF(SSL_COMP) *comp_methods; /* stack of SSL_COMP, SSLv3/TLSv1 */ /* Default values used when no per-SSL value is defined follow */ /* used if SSL's info_callback is NULL */ void (*info_callback) (const SSL *ssl, int type, int val); /* what we put in client cert requests */ STACK_OF(X509_NAME) *client_CA; /* * Default values to use in SSL structures follow (these are copied by * SSL_new) */ unsigned long options; unsigned long mode; long max_cert_list; struct cert_st /* CERT */ *cert; int read_ahead; /* callback that allows applications to peek at protocol messages */ void (*msg_callback) (int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg); void *msg_callback_arg; int verify_mode; unsigned int sid_ctx_length; unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; /* called 'verify_callback' in the SSL */ int (*default_verify_callback) (int ok, X509_STORE_CTX *ctx); /* Default generate session ID callback. */ GEN_SESSION_CB generate_session_id; X509_VERIFY_PARAM *param; # if 0 int purpose; /* Purpose setting */ int trust; /* Trust setting */ # endif int quiet_shutdown; /* * Maximum amount of data to send in one fragment. actual record size can * be more than this due to padding and MAC overheads. */ unsigned int max_send_fragment; # ifndef OPENSSL_NO_ENGINE /* * Engine to pass requests for client certs to */ ENGINE *client_cert_engine; # endif # ifndef OPENSSL_NO_TLSEXT /* TLS extensions servername callback */ int (*tlsext_servername_callback) (SSL *, int *, void *); void *tlsext_servername_arg; /* RFC 4507 session ticket keys */ unsigned char tlsext_tick_key_name[16]; unsigned char tlsext_tick_hmac_key[16]; unsigned char tlsext_tick_aes_key[16]; /* Callback to support customisation of ticket key setting */ int (*tlsext_ticket_key_cb) (SSL *ssl, unsigned char *name, unsigned char *iv, EVP_CIPHER_CTX *ectx, HMAC_CTX *hctx, int enc); /* certificate status request info */ /* Callback for status request */ int (*tlsext_status_cb) (SSL *ssl, void *arg); void *tlsext_status_arg; /* draft-rescorla-tls-opaque-prf-input-00.txt information */ int (*tlsext_opaque_prf_input_callback) (SSL *, void *peerinput, size_t len, void *arg); void *tlsext_opaque_prf_input_callback_arg; # endif # ifndef OPENSSL_NO_PSK char *psk_identity_hint; unsigned int (*psk_client_callback) (SSL *ssl, const char *hint, char *identity, unsigned int max_identity_len, unsigned char *psk, unsigned int max_psk_len); unsigned int (*psk_server_callback) (SSL *ssl, const char *identity, unsigned char *psk, unsigned int max_psk_len); # endif # ifndef OPENSSL_NO_BUF_FREELISTS # define SSL_MAX_BUF_FREELIST_LEN_DEFAULT 32 unsigned int freelist_max_len; struct ssl3_buf_freelist_st *wbuf_freelist; struct ssl3_buf_freelist_st *rbuf_freelist; # endif # ifndef OPENSSL_NO_TLSEXT # ifndef OPENSSL_NO_NEXTPROTONEG /* Next protocol negotiation information */ /* (for experimental NPN extension). */ /* * For a server, this contains a callback function by which the set of * advertised protocols can be provided. */ int (*next_protos_advertised_cb) (SSL *s, const unsigned char **buf, unsigned int *len, void *arg); void *next_protos_advertised_cb_arg; /* * For a client, this contains a callback function that selects the next * protocol from the list provided by the server. */ int (*next_proto_select_cb) (SSL *s, unsigned char **out, unsigned char *outlen, const unsigned char *in, unsigned int inlen, void *arg); void *next_proto_select_cb_arg; # endif /* SRTP profiles we are willing to do from RFC 5764 */ STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles; /* * ALPN information (we are in the process of transitioning from NPN to * ALPN.) */ /*- * For a server, this contains a callback function that allows the * server to select the protocol for the connection. * out: on successful return, this must point to the raw protocol * name (without the length prefix). * outlen: on successful return, this contains the length of |*out|. * in: points to the client's list of supported protocols in * wire-format. * inlen: the length of |in|. */ int (*alpn_select_cb) (SSL *s, const unsigned char **out, unsigned char *outlen, const unsigned char *in, unsigned int inlen, void *arg); void *alpn_select_cb_arg; /* * For a client, this contains the list of supported protocols in wire * format. */ unsigned char *alpn_client_proto_list; unsigned alpn_client_proto_list_len; # ifndef OPENSSL_NO_EC /* EC extension values inherited by SSL structure */ size_t tlsext_ecpointformatlist_length; unsigned char *tlsext_ecpointformatlist; size_t tlsext_ellipticcurvelist_length; unsigned char *tlsext_ellipticcurvelist; # endif /* OPENSSL_NO_EC */ # endif }; # endif # define SSL_SESS_CACHE_OFF 0x0000 # define SSL_SESS_CACHE_CLIENT 0x0001 # define SSL_SESS_CACHE_SERVER 0x0002 # define SSL_SESS_CACHE_BOTH (SSL_SESS_CACHE_CLIENT|SSL_SESS_CACHE_SERVER) # define SSL_SESS_CACHE_NO_AUTO_CLEAR 0x0080 /* enough comments already ... see SSL_CTX_set_session_cache_mode(3) */ # define SSL_SESS_CACHE_NO_INTERNAL_LOOKUP 0x0100 # define SSL_SESS_CACHE_NO_INTERNAL_STORE 0x0200 # define SSL_SESS_CACHE_NO_INTERNAL \ (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP|SSL_SESS_CACHE_NO_INTERNAL_STORE) LHASH_OF(SSL_SESSION) *SSL_CTX_sessions(SSL_CTX *ctx); # define SSL_CTX_sess_number(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_NUMBER,0,NULL) # define SSL_CTX_sess_connect(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CONNECT,0,NULL) # define SSL_CTX_sess_connect_good(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CONNECT_GOOD,0,NULL) # define SSL_CTX_sess_connect_renegotiate(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CONNECT_RENEGOTIATE,0,NULL) # define SSL_CTX_sess_accept(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_ACCEPT,0,NULL) # define SSL_CTX_sess_accept_renegotiate(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_ACCEPT_RENEGOTIATE,0,NULL) # define SSL_CTX_sess_accept_good(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_ACCEPT_GOOD,0,NULL) # define SSL_CTX_sess_hits(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_HIT,0,NULL) # define SSL_CTX_sess_cb_hits(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CB_HIT,0,NULL) # define SSL_CTX_sess_misses(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_MISSES,0,NULL) # define SSL_CTX_sess_timeouts(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_TIMEOUTS,0,NULL) # define SSL_CTX_sess_cache_full(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CACHE_FULL,0,NULL) void SSL_CTX_sess_set_new_cb(SSL_CTX *ctx, int (*new_session_cb) (struct ssl_st *ssl, SSL_SESSION *sess)); int (*SSL_CTX_sess_get_new_cb(SSL_CTX *ctx)) (struct ssl_st *ssl, SSL_SESSION *sess); void SSL_CTX_sess_set_remove_cb(SSL_CTX *ctx, void (*remove_session_cb) (struct ssl_ctx_st *ctx, SSL_SESSION *sess)); void (*SSL_CTX_sess_get_remove_cb(SSL_CTX *ctx)) (struct ssl_ctx_st *ctx, SSL_SESSION *sess); void SSL_CTX_sess_set_get_cb(SSL_CTX *ctx, SSL_SESSION *(*get_session_cb) (struct ssl_st *ssl, unsigned char *data, int len, int *copy)); SSL_SESSION *(*SSL_CTX_sess_get_get_cb(SSL_CTX *ctx)) (struct ssl_st *ssl, unsigned char *Data, int len, int *copy); void SSL_CTX_set_info_callback(SSL_CTX *ctx, void (*cb) (const SSL *ssl, int type, int val)); void (*SSL_CTX_get_info_callback(SSL_CTX *ctx)) (const SSL *ssl, int type, int val); void SSL_CTX_set_client_cert_cb(SSL_CTX *ctx, int (*client_cert_cb) (SSL *ssl, X509 **x509, EVP_PKEY **pkey)); int (*SSL_CTX_get_client_cert_cb(SSL_CTX *ctx)) (SSL *ssl, X509 **x509, EVP_PKEY **pkey); # ifndef OPENSSL_NO_ENGINE int SSL_CTX_set_client_cert_engine(SSL_CTX *ctx, ENGINE *e); # endif void SSL_CTX_set_cookie_generate_cb(SSL_CTX *ctx, int (*app_gen_cookie_cb) (SSL *ssl, unsigned char *cookie, unsigned int *cookie_len)); void SSL_CTX_set_cookie_verify_cb(SSL_CTX *ctx, int (*app_verify_cookie_cb) (SSL *ssl, unsigned char *cookie, unsigned int cookie_len)); # ifndef OPENSSL_NO_NEXTPROTONEG void SSL_CTX_set_next_protos_advertised_cb(SSL_CTX *s, int (*cb) (SSL *ssl, const unsigned char **out, unsigned int *outlen, void *arg), void *arg); void SSL_CTX_set_next_proto_select_cb(SSL_CTX *s, int (*cb) (SSL *ssl, unsigned char **out, unsigned char *outlen, const unsigned char *in, unsigned int inlen, void *arg), void *arg); void SSL_get0_next_proto_negotiated(const SSL *s, const unsigned char **data, unsigned *len); # endif # ifndef OPENSSL_NO_TLSEXT int SSL_select_next_proto(unsigned char **out, unsigned char *outlen, const unsigned char *in, unsigned int inlen, const unsigned char *client, unsigned int client_len); # endif # define OPENSSL_NPN_UNSUPPORTED 0 # define OPENSSL_NPN_NEGOTIATED 1 # define OPENSSL_NPN_NO_OVERLAP 2 int SSL_CTX_set_alpn_protos(SSL_CTX *ctx, const unsigned char *protos, unsigned protos_len); int SSL_set_alpn_protos(SSL *ssl, const unsigned char *protos, unsigned protos_len); void SSL_CTX_set_alpn_select_cb(SSL_CTX *ctx, int (*cb) (SSL *ssl, const unsigned char **out, unsigned char *outlen, const unsigned char *in, unsigned int inlen, void *arg), void *arg); void SSL_get0_alpn_selected(const SSL *ssl, const unsigned char **data, unsigned *len); # ifndef OPENSSL_NO_PSK /* * the maximum length of the buffer given to callbacks containing the * resulting identity/psk */ # define PSK_MAX_IDENTITY_LEN 128 # define PSK_MAX_PSK_LEN 256 void SSL_CTX_set_psk_client_callback(SSL_CTX *ctx, unsigned int (*psk_client_callback) (SSL *ssl, const char *hint, char *identity, unsigned int max_identity_len, unsigned char *psk, unsigned int max_psk_len)); void SSL_set_psk_client_callback(SSL *ssl, unsigned int (*psk_client_callback) (SSL *ssl, const char *hint, char *identity, unsigned int max_identity_len, unsigned char *psk, unsigned int max_psk_len)); void SSL_CTX_set_psk_server_callback(SSL_CTX *ctx, unsigned int (*psk_server_callback) (SSL *ssl, const char *identity, unsigned char *psk, unsigned int max_psk_len)); void SSL_set_psk_server_callback(SSL *ssl, unsigned int (*psk_server_callback) (SSL *ssl, const char *identity, unsigned char *psk, unsigned int max_psk_len)); int SSL_CTX_use_psk_identity_hint(SSL_CTX *ctx, const char *identity_hint); int SSL_use_psk_identity_hint(SSL *s, const char *identity_hint); const char *SSL_get_psk_identity_hint(const SSL *s); const char *SSL_get_psk_identity(const SSL *s); # endif # ifndef OPENSSL_NO_TLSEXT /* Register callbacks to handle custom TLS Extensions for client or server. */ int SSL_CTX_add_client_custom_ext(SSL_CTX *ctx, unsigned int ext_type, custom_ext_add_cb add_cb, custom_ext_free_cb free_cb, void *add_arg, custom_ext_parse_cb parse_cb, void *parse_arg); int SSL_CTX_add_server_custom_ext(SSL_CTX *ctx, unsigned int ext_type, custom_ext_add_cb add_cb, custom_ext_free_cb free_cb, void *add_arg, custom_ext_parse_cb parse_cb, void *parse_arg); int SSL_extension_supported(unsigned int ext_type); # endif # define SSL_NOTHING 1 # define SSL_WRITING 2 # define SSL_READING 3 # define SSL_X509_LOOKUP 4 /* These will only be used when doing non-blocking IO */ # define SSL_want_nothing(s) (SSL_want(s) == SSL_NOTHING) # define SSL_want_read(s) (SSL_want(s) == SSL_READING) # define SSL_want_write(s) (SSL_want(s) == SSL_WRITING) # define SSL_want_x509_lookup(s) (SSL_want(s) == SSL_X509_LOOKUP) # define SSL_MAC_FLAG_READ_MAC_STREAM 1 # define SSL_MAC_FLAG_WRITE_MAC_STREAM 2 # ifndef OPENSSL_NO_SSL_INTERN struct ssl_st { /* * protocol version (one of SSL2_VERSION, SSL3_VERSION, TLS1_VERSION, * DTLS1_VERSION) */ int version; /* SSL_ST_CONNECT or SSL_ST_ACCEPT */ int type; /* SSLv3 */ const SSL_METHOD *method; /* * There are 2 BIO's even though they are normally both the same. This * is so data can be read and written to different handlers */ # ifndef OPENSSL_NO_BIO /* used by SSL_read */ BIO *rbio; /* used by SSL_write */ BIO *wbio; /* used during session-id reuse to concatenate messages */ BIO *bbio; # else /* used by SSL_read */ char *rbio; /* used by SSL_write */ char *wbio; char *bbio; # endif /* * This holds a variable that indicates what we were doing when a 0 or -1 * is returned. This is needed for non-blocking IO so we know what * request needs re-doing when in SSL_accept or SSL_connect */ int rwstate; /* true when we are actually in SSL_accept() or SSL_connect() */ int in_handshake; int (*handshake_func) (SSL *); /* * Imagine that here's a boolean member "init" that is switched as soon * as SSL_set_{accept/connect}_state is called for the first time, so * that "state" and "handshake_func" are properly initialized. But as * handshake_func is == 0 until then, we use this test instead of an * "init" member. */ /* are we the server side? - mostly used by SSL_clear */ int server; /* * Generate a new session or reuse an old one. * NB: For servers, the 'new' session may actually be a previously * cached session or even the previous session unless * SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION is set */ int new_session; /* don't send shutdown packets */ int quiet_shutdown; /* we have shut things down, 0x01 sent, 0x02 for received */ int shutdown; /* where we are */ int state; /* where we are when reading */ int rstate; BUF_MEM *init_buf; /* buffer used during init */ void *init_msg; /* pointer to handshake message body, set by * ssl3_get_message() */ int init_num; /* amount read/written */ int init_off; /* amount read/written */ /* used internally to point at a raw packet */ unsigned char *packet; unsigned int packet_length; struct ssl2_state_st *s2; /* SSLv2 variables */ struct ssl3_state_st *s3; /* SSLv3 variables */ struct dtls1_state_st *d1; /* DTLSv1 variables */ int read_ahead; /* Read as many input bytes as possible (for * non-blocking reads) */ /* callback that allows applications to peek at protocol messages */ void (*msg_callback) (int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg); void *msg_callback_arg; int hit; /* reusing a previous session */ X509_VERIFY_PARAM *param; # if 0 int purpose; /* Purpose setting */ int trust; /* Trust setting */ # endif /* crypto */ STACK_OF(SSL_CIPHER) *cipher_list; STACK_OF(SSL_CIPHER) *cipher_list_by_id; /* * These are the ones being used, the ones in SSL_SESSION are the ones to * be 'copied' into these ones */ int mac_flags; EVP_CIPHER_CTX *enc_read_ctx; /* cryptographic state */ EVP_MD_CTX *read_hash; /* used for mac generation */ # ifndef OPENSSL_NO_COMP COMP_CTX *expand; /* uncompress */ # else char *expand; # endif EVP_CIPHER_CTX *enc_write_ctx; /* cryptographic state */ EVP_MD_CTX *write_hash; /* used for mac generation */ # ifndef OPENSSL_NO_COMP COMP_CTX *compress; /* compression */ # else char *compress; # endif /* session info */ /* client cert? */ /* This is used to hold the server certificate used */ struct cert_st /* CERT */ *cert; /* * the session_id_context is used to ensure sessions are only reused in * the appropriate context */ unsigned int sid_ctx_length; unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; /* This can also be in the session once a session is established */ SSL_SESSION *session; /* Default generate session ID callback. */ GEN_SESSION_CB generate_session_id; /* Used in SSL2 and SSL3 */ /* * 0 don't care about verify failure. * 1 fail if verify fails */ int verify_mode; /* fail if callback returns 0 */ int (*verify_callback) (int ok, X509_STORE_CTX *ctx); /* optional informational callback */ void (*info_callback) (const SSL *ssl, int type, int val); /* error bytes to be written */ int error; /* actual code */ int error_code; # ifndef OPENSSL_NO_KRB5 /* Kerberos 5 context */ KSSL_CTX *kssl_ctx; # endif /* OPENSSL_NO_KRB5 */ # ifndef OPENSSL_NO_PSK unsigned int (*psk_client_callback) (SSL *ssl, const char *hint, char *identity, unsigned int max_identity_len, unsigned char *psk, unsigned int max_psk_len); unsigned int (*psk_server_callback) (SSL *ssl, const char *identity, unsigned char *psk, unsigned int max_psk_len); # endif SSL_CTX *ctx; /* * set this flag to 1 and a sleep(1) is put into all SSL_read() and * SSL_write() calls, good for nbio debuging :-) */ int debug; /* extra application data */ long verify_result; CRYPTO_EX_DATA ex_data; /* for server side, keep the list of CA_dn we can use */ STACK_OF(X509_NAME) *client_CA; int references; /* protocol behaviour */ unsigned long options; /* API behaviour */ unsigned long mode; long max_cert_list; int first_packet; /* what was passed, used for SSLv3/TLS rollback check */ int client_version; unsigned int max_send_fragment; # ifndef OPENSSL_NO_TLSEXT /* TLS extension debug callback */ void (*tlsext_debug_cb) (SSL *s, int client_server, int type, unsigned char *data, int len, void *arg); void *tlsext_debug_arg; char *tlsext_hostname; /*- * no further mod of servername * 0 : call the servername extension callback. * 1 : prepare 2, allow last ack just after in server callback. * 2 : don't call servername callback, no ack in server hello */ int servername_done; /* certificate status request info */ /* Status type or -1 if no status type */ int tlsext_status_type; /* Expect OCSP CertificateStatus message */ int tlsext_status_expected; /* OCSP status request only */ STACK_OF(OCSP_RESPID) *tlsext_ocsp_ids; X509_EXTENSIONS *tlsext_ocsp_exts; /* OCSP response received or to be sent */ unsigned char *tlsext_ocsp_resp; int tlsext_ocsp_resplen; /* RFC4507 session ticket expected to be received or sent */ int tlsext_ticket_expected; # ifndef OPENSSL_NO_EC size_t tlsext_ecpointformatlist_length; /* our list */ unsigned char *tlsext_ecpointformatlist; size_t tlsext_ellipticcurvelist_length; /* our list */ unsigned char *tlsext_ellipticcurvelist; # endif /* OPENSSL_NO_EC */ /* * draft-rescorla-tls-opaque-prf-input-00.txt information to be used for * handshakes */ void *tlsext_opaque_prf_input; size_t tlsext_opaque_prf_input_len; /* TLS Session Ticket extension override */ TLS_SESSION_TICKET_EXT *tlsext_session_ticket; /* TLS Session Ticket extension callback */ tls_session_ticket_ext_cb_fn tls_session_ticket_ext_cb; void *tls_session_ticket_ext_cb_arg; /* TLS pre-shared secret session resumption */ tls_session_secret_cb_fn tls_session_secret_cb; void *tls_session_secret_cb_arg; SSL_CTX *initial_ctx; /* initial ctx, used to store sessions */ # ifndef OPENSSL_NO_NEXTPROTONEG /* * Next protocol negotiation. For the client, this is the protocol that * we sent in NextProtocol and is set when handling ServerHello * extensions. For a server, this is the client's selected_protocol from * NextProtocol and is set when handling the NextProtocol message, before * the Finished message. */ unsigned char *next_proto_negotiated; unsigned char next_proto_negotiated_len; # endif # define session_ctx initial_ctx /* What we'll do */ STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles; /* What's been chosen */ SRTP_PROTECTION_PROFILE *srtp_profile; /*- * Is use of the Heartbeat extension negotiated? * 0: disabled * 1: enabled * 2: enabled, but not allowed to send Requests */ unsigned int tlsext_heartbeat; /* Indicates if a HeartbeatRequest is in flight */ unsigned int tlsext_hb_pending; /* HeartbeatRequest sequence number */ unsigned int tlsext_hb_seq; # else # define session_ctx ctx # endif /* OPENSSL_NO_TLSEXT */ /*- * 1 if we are renegotiating. * 2 if we are a server and are inside a handshake * (i.e. not just sending a HelloRequest) */ int renegotiate; # ifndef OPENSSL_NO_TLSEXT /* * For a client, this contains the list of supported protocols in wire * format. */ unsigned char *alpn_client_proto_list; unsigned alpn_client_proto_list_len; # endif /* OPENSSL_NO_TLSEXT */ }; # endif #ifdef __cplusplus } #endif # include <openssl/ssl2.h> # include <openssl/ssl3.h> # include <openssl/tls1.h> /* This is mostly sslv3 with a few tweaks */ # include <openssl/dtls1.h> /* Datagram TLS */ # include <openssl/ssl23.h> # include <openssl/srtp.h> /* Support for the use_srtp extension */ #ifdef __cplusplus extern "C" { #endif /* compatibility */ # define SSL_set_app_data(s,arg) (SSL_set_ex_data(s,0,(char *)arg)) # define SSL_get_app_data(s) (SSL_get_ex_data(s,0)) # define SSL_SESSION_set_app_data(s,a) (SSL_SESSION_set_ex_data(s,0,(char *)a)) # define SSL_SESSION_get_app_data(s) (SSL_SESSION_get_ex_data(s,0)) # define SSL_CTX_get_app_data(ctx) (SSL_CTX_get_ex_data(ctx,0)) # define SSL_CTX_set_app_data(ctx,arg) (SSL_CTX_set_ex_data(ctx,0,(char *)arg)) /* * The following are the possible values for ssl->state are are used to * indicate where we are up to in the SSL connection establishment. The * macros that follow are about the only things you should need to use and * even then, only when using non-blocking IO. It can also be useful to work * out where you were when the connection failed */ # define SSL_ST_CONNECT 0x1000 # define SSL_ST_ACCEPT 0x2000 # define SSL_ST_MASK 0x0FFF # define SSL_ST_INIT (SSL_ST_CONNECT|SSL_ST_ACCEPT) # define SSL_ST_BEFORE 0x4000 # define SSL_ST_OK 0x03 # define SSL_ST_RENEGOTIATE (0x04|SSL_ST_INIT) # define SSL_ST_ERR (0x05|SSL_ST_INIT) # define SSL_CB_LOOP 0x01 # define SSL_CB_EXIT 0x02 # define SSL_CB_READ 0x04 # define SSL_CB_WRITE 0x08 # define SSL_CB_ALERT 0x4000/* used in callback */ # define SSL_CB_READ_ALERT (SSL_CB_ALERT|SSL_CB_READ) # define SSL_CB_WRITE_ALERT (SSL_CB_ALERT|SSL_CB_WRITE) # define SSL_CB_ACCEPT_LOOP (SSL_ST_ACCEPT|SSL_CB_LOOP) # define SSL_CB_ACCEPT_EXIT (SSL_ST_ACCEPT|SSL_CB_EXIT) # define SSL_CB_CONNECT_LOOP (SSL_ST_CONNECT|SSL_CB_LOOP) # define SSL_CB_CONNECT_EXIT (SSL_ST_CONNECT|SSL_CB_EXIT) # define SSL_CB_HANDSHAKE_START 0x10 # define SSL_CB_HANDSHAKE_DONE 0x20 /* Is the SSL_connection established? */ # define SSL_get_state(a) SSL_state(a) # define SSL_is_init_finished(a) (SSL_state(a) == SSL_ST_OK) # define SSL_in_init(a) (SSL_state(a)&SSL_ST_INIT) # define SSL_in_before(a) (SSL_state(a)&SSL_ST_BEFORE) # define SSL_in_connect_init(a) (SSL_state(a)&SSL_ST_CONNECT) # define SSL_in_accept_init(a) (SSL_state(a)&SSL_ST_ACCEPT) /* * The following 2 states are kept in ssl->rstate when reads fail, you should * not need these */ # define SSL_ST_READ_HEADER 0xF0 # define SSL_ST_READ_BODY 0xF1 # define SSL_ST_READ_DONE 0xF2 /*- * Obtain latest Finished message * -- that we sent (SSL_get_finished) * -- that we expected from peer (SSL_get_peer_finished). * Returns length (0 == no Finished so far), copies up to 'count' bytes. */ size_t SSL_get_finished(const SSL *s, void *buf, size_t count); size_t SSL_get_peer_finished(const SSL *s, void *buf, size_t count); /* * use either SSL_VERIFY_NONE or SSL_VERIFY_PEER, the last 2 options are * 'ored' with SSL_VERIFY_PEER if they are desired */ # define SSL_VERIFY_NONE 0x00 # define SSL_VERIFY_PEER 0x01 # define SSL_VERIFY_FAIL_IF_NO_PEER_CERT 0x02 # define SSL_VERIFY_CLIENT_ONCE 0x04 # define OpenSSL_add_ssl_algorithms() SSL_library_init() # define SSLeay_add_ssl_algorithms() SSL_library_init() /* this is for backward compatibility */ # if 0 /* NEW_SSLEAY */ # define SSL_CTX_set_default_verify(a,b,c) SSL_CTX_set_verify(a,b,c) # define SSL_set_pref_cipher(c,n) SSL_set_cipher_list(c,n) # define SSL_add_session(a,b) SSL_CTX_add_session((a),(b)) # define SSL_remove_session(a,b) SSL_CTX_remove_session((a),(b)) # define SSL_flush_sessions(a,b) SSL_CTX_flush_sessions((a),(b)) # endif /* More backward compatibility */ # define SSL_get_cipher(s) \ SSL_CIPHER_get_name(SSL_get_current_cipher(s)) # define SSL_get_cipher_bits(s,np) \ SSL_CIPHER_get_bits(SSL_get_current_cipher(s),np) # define SSL_get_cipher_version(s) \ SSL_CIPHER_get_version(SSL_get_current_cipher(s)) # define SSL_get_cipher_name(s) \ SSL_CIPHER_get_name(SSL_get_current_cipher(s)) # define SSL_get_time(a) SSL_SESSION_get_time(a) # define SSL_set_time(a,b) SSL_SESSION_set_time((a),(b)) # define SSL_get_timeout(a) SSL_SESSION_get_timeout(a) # define SSL_set_timeout(a,b) SSL_SESSION_set_timeout((a),(b)) # define d2i_SSL_SESSION_bio(bp,s_id) ASN1_d2i_bio_of(SSL_SESSION,SSL_SESSION_new,d2i_SSL_SESSION,bp,s_id) # define i2d_SSL_SESSION_bio(bp,s_id) ASN1_i2d_bio_of(SSL_SESSION,i2d_SSL_SESSION,bp,s_id) DECLARE_PEM_rw(SSL_SESSION, SSL_SESSION) # define SSL_AD_REASON_OFFSET 1000/* offset to get SSL_R_... value * from SSL_AD_... */ /* These alert types are for SSLv3 and TLSv1 */ # define SSL_AD_CLOSE_NOTIFY SSL3_AD_CLOSE_NOTIFY /* fatal */ # define SSL_AD_UNEXPECTED_MESSAGE SSL3_AD_UNEXPECTED_MESSAGE /* fatal */ # define SSL_AD_BAD_RECORD_MAC SSL3_AD_BAD_RECORD_MAC # define SSL_AD_DECRYPTION_FAILED TLS1_AD_DECRYPTION_FAILED # define SSL_AD_RECORD_OVERFLOW TLS1_AD_RECORD_OVERFLOW /* fatal */ # define SSL_AD_DECOMPRESSION_FAILURE SSL3_AD_DECOMPRESSION_FAILURE /* fatal */ # define SSL_AD_HANDSHAKE_FAILURE SSL3_AD_HANDSHAKE_FAILURE /* Not for TLS */ # define SSL_AD_NO_CERTIFICATE SSL3_AD_NO_CERTIFICATE # define SSL_AD_BAD_CERTIFICATE SSL3_AD_BAD_CERTIFICATE # define SSL_AD_UNSUPPORTED_CERTIFICATE SSL3_AD_UNSUPPORTED_CERTIFICATE # define SSL_AD_CERTIFICATE_REVOKED SSL3_AD_CERTIFICATE_REVOKED # define SSL_AD_CERTIFICATE_EXPIRED SSL3_AD_CERTIFICATE_EXPIRED # define SSL_AD_CERTIFICATE_UNKNOWN SSL3_AD_CERTIFICATE_UNKNOWN /* fatal */ # define SSL_AD_ILLEGAL_PARAMETER SSL3_AD_ILLEGAL_PARAMETER /* fatal */ # define SSL_AD_UNKNOWN_CA TLS1_AD_UNKNOWN_CA /* fatal */ # define SSL_AD_ACCESS_DENIED TLS1_AD_ACCESS_DENIED /* fatal */ # define SSL_AD_DECODE_ERROR TLS1_AD_DECODE_ERROR # define SSL_AD_DECRYPT_ERROR TLS1_AD_DECRYPT_ERROR /* fatal */ # define SSL_AD_EXPORT_RESTRICTION TLS1_AD_EXPORT_RESTRICTION /* fatal */ # define SSL_AD_PROTOCOL_VERSION TLS1_AD_PROTOCOL_VERSION /* fatal */ # define SSL_AD_INSUFFICIENT_SECURITY TLS1_AD_INSUFFICIENT_SECURITY /* fatal */ # define SSL_AD_INTERNAL_ERROR TLS1_AD_INTERNAL_ERROR # define SSL_AD_USER_CANCELLED TLS1_AD_USER_CANCELLED # define SSL_AD_NO_RENEGOTIATION TLS1_AD_NO_RENEGOTIATION # define SSL_AD_UNSUPPORTED_EXTENSION TLS1_AD_UNSUPPORTED_EXTENSION # define SSL_AD_CERTIFICATE_UNOBTAINABLE TLS1_AD_CERTIFICATE_UNOBTAINABLE # define SSL_AD_UNRECOGNIZED_NAME TLS1_AD_UNRECOGNIZED_NAME # define SSL_AD_BAD_CERTIFICATE_STATUS_RESPONSE TLS1_AD_BAD_CERTIFICATE_STATUS_RESPONSE # define SSL_AD_BAD_CERTIFICATE_HASH_VALUE TLS1_AD_BAD_CERTIFICATE_HASH_VALUE /* fatal */ # define SSL_AD_UNKNOWN_PSK_IDENTITY TLS1_AD_UNKNOWN_PSK_IDENTITY /* fatal */ # define SSL_AD_INAPPROPRIATE_FALLBACK TLS1_AD_INAPPROPRIATE_FALLBACK # define SSL_ERROR_NONE 0 # define SSL_ERROR_SSL 1 # define SSL_ERROR_WANT_READ 2 # define SSL_ERROR_WANT_WRITE 3 # define SSL_ERROR_WANT_X509_LOOKUP 4 # define SSL_ERROR_SYSCALL 5/* look at error stack/return * value/errno */ # define SSL_ERROR_ZERO_RETURN 6 # define SSL_ERROR_WANT_CONNECT 7 # define SSL_ERROR_WANT_ACCEPT 8 # define SSL_CTRL_NEED_TMP_RSA 1 # define SSL_CTRL_SET_TMP_RSA 2 # define SSL_CTRL_SET_TMP_DH 3 # define SSL_CTRL_SET_TMP_ECDH 4 # define SSL_CTRL_SET_TMP_RSA_CB 5 # define SSL_CTRL_SET_TMP_DH_CB 6 # define SSL_CTRL_SET_TMP_ECDH_CB 7 # define SSL_CTRL_GET_SESSION_REUSED 8 # define SSL_CTRL_GET_CLIENT_CERT_REQUEST 9 # define SSL_CTRL_GET_NUM_RENEGOTIATIONS 10 # define SSL_CTRL_CLEAR_NUM_RENEGOTIATIONS 11 # define SSL_CTRL_GET_TOTAL_RENEGOTIATIONS 12 # define SSL_CTRL_GET_FLAGS 13 # define SSL_CTRL_EXTRA_CHAIN_CERT 14 # define SSL_CTRL_SET_MSG_CALLBACK 15 # define SSL_CTRL_SET_MSG_CALLBACK_ARG 16 /* only applies to datagram connections */ # define SSL_CTRL_SET_MTU 17 /* Stats */ # define SSL_CTRL_SESS_NUMBER 20 # define SSL_CTRL_SESS_CONNECT 21 # define SSL_CTRL_SESS_CONNECT_GOOD 22 # define SSL_CTRL_SESS_CONNECT_RENEGOTIATE 23 # define SSL_CTRL_SESS_ACCEPT 24 # define SSL_CTRL_SESS_ACCEPT_GOOD 25 # define SSL_CTRL_SESS_ACCEPT_RENEGOTIATE 26 # define SSL_CTRL_SESS_HIT 27 # define SSL_CTRL_SESS_CB_HIT 28 # define SSL_CTRL_SESS_MISSES 29 # define SSL_CTRL_SESS_TIMEOUTS 30 # define SSL_CTRL_SESS_CACHE_FULL 31 # define SSL_CTRL_OPTIONS 32 # define SSL_CTRL_MODE 33 # define SSL_CTRL_GET_READ_AHEAD 40 # define SSL_CTRL_SET_READ_AHEAD 41 # define SSL_CTRL_SET_SESS_CACHE_SIZE 42 # define SSL_CTRL_GET_SESS_CACHE_SIZE 43 # define SSL_CTRL_SET_SESS_CACHE_MODE 44 # define SSL_CTRL_GET_SESS_CACHE_MODE 45 # define SSL_CTRL_GET_MAX_CERT_LIST 50 # define SSL_CTRL_SET_MAX_CERT_LIST 51 # define SSL_CTRL_SET_MAX_SEND_FRAGMENT 52 /* see tls1.h for macros based on these */ # ifndef OPENSSL_NO_TLSEXT # define SSL_CTRL_SET_TLSEXT_SERVERNAME_CB 53 # define SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG 54 # define SSL_CTRL_SET_TLSEXT_HOSTNAME 55 # define SSL_CTRL_SET_TLSEXT_DEBUG_CB 56 # define SSL_CTRL_SET_TLSEXT_DEBUG_ARG 57 # define SSL_CTRL_GET_TLSEXT_TICKET_KEYS 58 # define SSL_CTRL_SET_TLSEXT_TICKET_KEYS 59 # define SSL_CTRL_SET_TLSEXT_OPAQUE_PRF_INPUT 60 # define SSL_CTRL_SET_TLSEXT_OPAQUE_PRF_INPUT_CB 61 # define SSL_CTRL_SET_TLSEXT_OPAQUE_PRF_INPUT_CB_ARG 62 # define SSL_CTRL_SET_TLSEXT_STATUS_REQ_CB 63 # define SSL_CTRL_SET_TLSEXT_STATUS_REQ_CB_ARG 64 # define SSL_CTRL_SET_TLSEXT_STATUS_REQ_TYPE 65 # define SSL_CTRL_GET_TLSEXT_STATUS_REQ_EXTS 66 # define SSL_CTRL_SET_TLSEXT_STATUS_REQ_EXTS 67 # define SSL_CTRL_GET_TLSEXT_STATUS_REQ_IDS 68 # define SSL_CTRL_SET_TLSEXT_STATUS_REQ_IDS 69 # define SSL_CTRL_GET_TLSEXT_STATUS_REQ_OCSP_RESP 70 # define SSL_CTRL_SET_TLSEXT_STATUS_REQ_OCSP_RESP 71 # define SSL_CTRL_SET_TLSEXT_TICKET_KEY_CB 72 # define SSL_CTRL_SET_TLS_EXT_SRP_USERNAME_CB 75 # define SSL_CTRL_SET_SRP_VERIFY_PARAM_CB 76 # define SSL_CTRL_SET_SRP_GIVE_CLIENT_PWD_CB 77 # define SSL_CTRL_SET_SRP_ARG 78 # define SSL_CTRL_SET_TLS_EXT_SRP_USERNAME 79 # define SSL_CTRL_SET_TLS_EXT_SRP_STRENGTH 80 # define SSL_CTRL_SET_TLS_EXT_SRP_PASSWORD 81 # ifndef OPENSSL_NO_HEARTBEATS # define SSL_CTRL_TLS_EXT_SEND_HEARTBEAT 85 # define SSL_CTRL_GET_TLS_EXT_HEARTBEAT_PENDING 86 # define SSL_CTRL_SET_TLS_EXT_HEARTBEAT_NO_REQUESTS 87 # endif # endif /* OPENSSL_NO_TLSEXT */ # define DTLS_CTRL_GET_TIMEOUT 73 # define DTLS_CTRL_HANDLE_TIMEOUT 74 # define DTLS_CTRL_LISTEN 75 # define SSL_CTRL_GET_RI_SUPPORT 76 # define SSL_CTRL_CLEAR_OPTIONS 77 # define SSL_CTRL_CLEAR_MODE 78 # define SSL_CTRL_GET_EXTRA_CHAIN_CERTS 82 # define SSL_CTRL_CLEAR_EXTRA_CHAIN_CERTS 83 # define SSL_CTRL_CHAIN 88 # define SSL_CTRL_CHAIN_CERT 89 # define SSL_CTRL_GET_CURVES 90 # define SSL_CTRL_SET_CURVES 91 # define SSL_CTRL_SET_CURVES_LIST 92 # define SSL_CTRL_GET_SHARED_CURVE 93 # define SSL_CTRL_SET_ECDH_AUTO 94 # define SSL_CTRL_SET_SIGALGS 97 # define SSL_CTRL_SET_SIGALGS_LIST 98 # define SSL_CTRL_CERT_FLAGS 99 # define SSL_CTRL_CLEAR_CERT_FLAGS 100 # define SSL_CTRL_SET_CLIENT_SIGALGS 101 # define SSL_CTRL_SET_CLIENT_SIGALGS_LIST 102 # define SSL_CTRL_GET_CLIENT_CERT_TYPES 103 # define SSL_CTRL_SET_CLIENT_CERT_TYPES 104 # define SSL_CTRL_BUILD_CERT_CHAIN 105 # define SSL_CTRL_SET_VERIFY_CERT_STORE 106 # define SSL_CTRL_SET_CHAIN_CERT_STORE 107 # define SSL_CTRL_GET_PEER_SIGNATURE_NID 108 # define SSL_CTRL_GET_SERVER_TMP_KEY 109 # define SSL_CTRL_GET_RAW_CIPHERLIST 110 # define SSL_CTRL_GET_EC_POINT_FORMATS 111 # define SSL_CTRL_GET_CHAIN_CERTS 115 # define SSL_CTRL_SELECT_CURRENT_CERT 116 # define SSL_CTRL_SET_CURRENT_CERT 117 # define SSL_CTRL_CHECK_PROTO_VERSION 119 # define DTLS_CTRL_SET_LINK_MTU 120 # define DTLS_CTRL_GET_LINK_MIN_MTU 121 # define SSL_CERT_SET_FIRST 1 # define SSL_CERT_SET_NEXT 2 # define SSL_CERT_SET_SERVER 3 # define DTLSv1_get_timeout(ssl, arg) \ SSL_ctrl(ssl,DTLS_CTRL_GET_TIMEOUT,0, (void *)arg) # define DTLSv1_handle_timeout(ssl) \ SSL_ctrl(ssl,DTLS_CTRL_HANDLE_TIMEOUT,0, NULL) # define DTLSv1_listen(ssl, peer) \ SSL_ctrl(ssl,DTLS_CTRL_LISTEN,0, (void *)peer) # define SSL_session_reused(ssl) \ SSL_ctrl((ssl),SSL_CTRL_GET_SESSION_REUSED,0,NULL) # define SSL_num_renegotiations(ssl) \ SSL_ctrl((ssl),SSL_CTRL_GET_NUM_RENEGOTIATIONS,0,NULL) # define SSL_clear_num_renegotiations(ssl) \ SSL_ctrl((ssl),SSL_CTRL_CLEAR_NUM_RENEGOTIATIONS,0,NULL) # define SSL_total_renegotiations(ssl) \ SSL_ctrl((ssl),SSL_CTRL_GET_TOTAL_RENEGOTIATIONS,0,NULL) # define SSL_CTX_need_tmp_RSA(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_NEED_TMP_RSA,0,NULL) # define SSL_CTX_set_tmp_rsa(ctx,rsa) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_RSA,0,(char *)rsa) # define SSL_CTX_set_tmp_dh(ctx,dh) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_DH,0,(char *)dh) # define SSL_CTX_set_tmp_ecdh(ctx,ecdh) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_ECDH,0,(char *)ecdh) # define SSL_need_tmp_RSA(ssl) \ SSL_ctrl(ssl,SSL_CTRL_NEED_TMP_RSA,0,NULL) # define SSL_set_tmp_rsa(ssl,rsa) \ SSL_ctrl(ssl,SSL_CTRL_SET_TMP_RSA,0,(char *)rsa) # define SSL_set_tmp_dh(ssl,dh) \ SSL_ctrl(ssl,SSL_CTRL_SET_TMP_DH,0,(char *)dh) # define SSL_set_tmp_ecdh(ssl,ecdh) \ SSL_ctrl(ssl,SSL_CTRL_SET_TMP_ECDH,0,(char *)ecdh) # define SSL_CTX_add_extra_chain_cert(ctx,x509) \ SSL_CTX_ctrl(ctx,SSL_CTRL_EXTRA_CHAIN_CERT,0,(char *)x509) # define SSL_CTX_get_extra_chain_certs(ctx,px509) \ SSL_CTX_ctrl(ctx,SSL_CTRL_GET_EXTRA_CHAIN_CERTS,0,px509) # define SSL_CTX_get_extra_chain_certs_only(ctx,px509) \ SSL_CTX_ctrl(ctx,SSL_CTRL_GET_EXTRA_CHAIN_CERTS,1,px509) # define SSL_CTX_clear_extra_chain_certs(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_CLEAR_EXTRA_CHAIN_CERTS,0,NULL) # define SSL_CTX_set0_chain(ctx,sk) \ SSL_CTX_ctrl(ctx,SSL_CTRL_CHAIN,0,(char *)sk) # define SSL_CTX_set1_chain(ctx,sk) \ SSL_CTX_ctrl(ctx,SSL_CTRL_CHAIN,1,(char *)sk) # define SSL_CTX_add0_chain_cert(ctx,x509) \ SSL_CTX_ctrl(ctx,SSL_CTRL_CHAIN_CERT,0,(char *)x509) # define SSL_CTX_add1_chain_cert(ctx,x509) \ SSL_CTX_ctrl(ctx,SSL_CTRL_CHAIN_CERT,1,(char *)x509) # define SSL_CTX_get0_chain_certs(ctx,px509) \ SSL_CTX_ctrl(ctx,SSL_CTRL_GET_CHAIN_CERTS,0,px509) # define SSL_CTX_clear_chain_certs(ctx) \ SSL_CTX_set0_chain(ctx,NULL) # define SSL_CTX_build_cert_chain(ctx, flags) \ SSL_CTX_ctrl(ctx,SSL_CTRL_BUILD_CERT_CHAIN, flags, NULL) # define SSL_CTX_select_current_cert(ctx,x509) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SELECT_CURRENT_CERT,0,(char *)x509) # define SSL_CTX_set_current_cert(ctx, op) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_CURRENT_CERT, op, NULL) # define SSL_CTX_set0_verify_cert_store(ctx,st) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_VERIFY_CERT_STORE,0,(char *)st) # define SSL_CTX_set1_verify_cert_store(ctx,st) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_VERIFY_CERT_STORE,1,(char *)st) # define SSL_CTX_set0_chain_cert_store(ctx,st) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_CHAIN_CERT_STORE,0,(char *)st) # define SSL_CTX_set1_chain_cert_store(ctx,st) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_CHAIN_CERT_STORE,1,(char *)st) # define SSL_set0_chain(ctx,sk) \ SSL_ctrl(ctx,SSL_CTRL_CHAIN,0,(char *)sk) # define SSL_set1_chain(ctx,sk) \ SSL_ctrl(ctx,SSL_CTRL_CHAIN,1,(char *)sk) # define SSL_add0_chain_cert(ctx,x509) \ SSL_ctrl(ctx,SSL_CTRL_CHAIN_CERT,0,(char *)x509) # define SSL_add1_chain_cert(ctx,x509) \ SSL_ctrl(ctx,SSL_CTRL_CHAIN_CERT,1,(char *)x509) # define SSL_get0_chain_certs(ctx,px509) \ SSL_ctrl(ctx,SSL_CTRL_GET_CHAIN_CERTS,0,px509) # define SSL_clear_chain_certs(ctx) \ SSL_set0_chain(ctx,NULL) # define SSL_build_cert_chain(s, flags) \ SSL_ctrl(s,SSL_CTRL_BUILD_CERT_CHAIN, flags, NULL) # define SSL_select_current_cert(ctx,x509) \ SSL_ctrl(ctx,SSL_CTRL_SELECT_CURRENT_CERT,0,(char *)x509) # define SSL_set_current_cert(ctx,op) \ SSL_ctrl(ctx,SSL_CTRL_SET_CURRENT_CERT, op, NULL) # define SSL_set0_verify_cert_store(s,st) \ SSL_ctrl(s,SSL_CTRL_SET_VERIFY_CERT_STORE,0,(char *)st) # define SSL_set1_verify_cert_store(s,st) \ SSL_ctrl(s,SSL_CTRL_SET_VERIFY_CERT_STORE,1,(char *)st) # define SSL_set0_chain_cert_store(s,st) \ SSL_ctrl(s,SSL_CTRL_SET_CHAIN_CERT_STORE,0,(char *)st) # define SSL_set1_chain_cert_store(s,st) \ SSL_ctrl(s,SSL_CTRL_SET_CHAIN_CERT_STORE,1,(char *)st) # define SSL_get1_curves(ctx, s) \ SSL_ctrl(ctx,SSL_CTRL_GET_CURVES,0,(char *)s) # define SSL_CTX_set1_curves(ctx, clist, clistlen) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_CURVES,clistlen,(char *)clist) # define SSL_CTX_set1_curves_list(ctx, s) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_CURVES_LIST,0,(char *)s) # define SSL_set1_curves(ctx, clist, clistlen) \ SSL_ctrl(ctx,SSL_CTRL_SET_CURVES,clistlen,(char *)clist) # define SSL_set1_curves_list(ctx, s) \ SSL_ctrl(ctx,SSL_CTRL_SET_CURVES_LIST,0,(char *)s) # define SSL_get_shared_curve(s, n) \ SSL_ctrl(s,SSL_CTRL_GET_SHARED_CURVE,n,NULL) # define SSL_CTX_set_ecdh_auto(ctx, onoff) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_ECDH_AUTO,onoff,NULL) # define SSL_set_ecdh_auto(s, onoff) \ SSL_ctrl(s,SSL_CTRL_SET_ECDH_AUTO,onoff,NULL) # define SSL_CTX_set1_sigalgs(ctx, slist, slistlen) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_SIGALGS,slistlen,(int *)slist) # define SSL_CTX_set1_sigalgs_list(ctx, s) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_SIGALGS_LIST,0,(char *)s) # define SSL_set1_sigalgs(ctx, slist, slistlen) \ SSL_ctrl(ctx,SSL_CTRL_SET_SIGALGS,slistlen,(int *)slist) # define SSL_set1_sigalgs_list(ctx, s) \ SSL_ctrl(ctx,SSL_CTRL_SET_SIGALGS_LIST,0,(char *)s) # define SSL_CTX_set1_client_sigalgs(ctx, slist, slistlen) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_CLIENT_SIGALGS,slistlen,(int *)slist) # define SSL_CTX_set1_client_sigalgs_list(ctx, s) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_CLIENT_SIGALGS_LIST,0,(char *)s) # define SSL_set1_client_sigalgs(ctx, slist, slistlen) \ SSL_ctrl(ctx,SSL_CTRL_SET_CLIENT_SIGALGS,clistlen,(int *)slist) # define SSL_set1_client_sigalgs_list(ctx, s) \ SSL_ctrl(ctx,SSL_CTRL_SET_CLIENT_SIGALGS_LIST,0,(char *)s) # define SSL_get0_certificate_types(s, clist) \ SSL_ctrl(s, SSL_CTRL_GET_CLIENT_CERT_TYPES, 0, (char *)clist) # define SSL_CTX_set1_client_certificate_types(ctx, clist, clistlen) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_CLIENT_CERT_TYPES,clistlen,(char *)clist) # define SSL_set1_client_certificate_types(s, clist, clistlen) \ SSL_ctrl(s,SSL_CTRL_SET_CLIENT_CERT_TYPES,clistlen,(char *)clist) # define SSL_get_peer_signature_nid(s, pn) \ SSL_ctrl(s,SSL_CTRL_GET_PEER_SIGNATURE_NID,0,pn) # define SSL_get_server_tmp_key(s, pk) \ SSL_ctrl(s,SSL_CTRL_GET_SERVER_TMP_KEY,0,pk) # define SSL_get0_raw_cipherlist(s, plst) \ SSL_ctrl(s,SSL_CTRL_GET_RAW_CIPHERLIST,0,(char *)plst) # define SSL_get0_ec_point_formats(s, plst) \ SSL_ctrl(s,SSL_CTRL_GET_EC_POINT_FORMATS,0,(char *)plst) # ifndef OPENSSL_NO_BIO BIO_METHOD *BIO_f_ssl(void); BIO *BIO_new_ssl(SSL_CTX *ctx, int client); BIO *BIO_new_ssl_connect(SSL_CTX *ctx); BIO *BIO_new_buffer_ssl_connect(SSL_CTX *ctx); int BIO_ssl_copy_session_id(BIO *to, BIO *from); void BIO_ssl_shutdown(BIO *ssl_bio); # endif int SSL_CTX_set_cipher_list(SSL_CTX *, const char *str); SSL_CTX *SSL_CTX_new(const SSL_METHOD *meth); void SSL_CTX_free(SSL_CTX *); long SSL_CTX_set_timeout(SSL_CTX *ctx, long t); long SSL_CTX_get_timeout(const SSL_CTX *ctx); X509_STORE *SSL_CTX_get_cert_store(const SSL_CTX *); void SSL_CTX_set_cert_store(SSL_CTX *, X509_STORE *); int SSL_want(const SSL *s); int SSL_clear(SSL *s); void SSL_CTX_flush_sessions(SSL_CTX *ctx, long tm); const SSL_CIPHER *SSL_get_current_cipher(const SSL *s); int SSL_CIPHER_get_bits(const SSL_CIPHER *c, int *alg_bits); char *SSL_CIPHER_get_version(const SSL_CIPHER *c); const char *SSL_CIPHER_get_name(const SSL_CIPHER *c); unsigned long SSL_CIPHER_get_id(const SSL_CIPHER *c); int SSL_get_fd(const SSL *s); int SSL_get_rfd(const SSL *s); int SSL_get_wfd(const SSL *s); const char *SSL_get_cipher_list(const SSL *s, int n); char *SSL_get_shared_ciphers(const SSL *s, char *buf, int len); int SSL_get_read_ahead(const SSL *s); int SSL_pending(const SSL *s); # ifndef OPENSSL_NO_SOCK int SSL_set_fd(SSL *s, int fd); int SSL_set_rfd(SSL *s, int fd); int SSL_set_wfd(SSL *s, int fd); # endif # ifndef OPENSSL_NO_BIO void SSL_set_bio(SSL *s, BIO *rbio, BIO *wbio); BIO *SSL_get_rbio(const SSL *s); BIO *SSL_get_wbio(const SSL *s); # endif int SSL_set_cipher_list(SSL *s, const char *str); void SSL_set_read_ahead(SSL *s, int yes); int SSL_get_verify_mode(const SSL *s); int SSL_get_verify_depth(const SSL *s); int (*SSL_get_verify_callback(const SSL *s)) (int, X509_STORE_CTX *); void SSL_set_verify(SSL *s, int mode, int (*callback) (int ok, X509_STORE_CTX *ctx)); void SSL_set_verify_depth(SSL *s, int depth); void SSL_set_cert_cb(SSL *s, int (*cb) (SSL *ssl, void *arg), void *arg); # ifndef OPENSSL_NO_RSA int SSL_use_RSAPrivateKey(SSL *ssl, RSA *rsa); # endif int SSL_use_RSAPrivateKey_ASN1(SSL *ssl, unsigned char *d, long len); int SSL_use_PrivateKey(SSL *ssl, EVP_PKEY *pkey); int SSL_use_PrivateKey_ASN1(int pk, SSL *ssl, const unsigned char *d, long len); int SSL_use_certificate(SSL *ssl, X509 *x); int SSL_use_certificate_ASN1(SSL *ssl, const unsigned char *d, int len); # ifndef OPENSSL_NO_TLSEXT /* Set serverinfo data for the current active cert. */ int SSL_CTX_use_serverinfo(SSL_CTX *ctx, const unsigned char *serverinfo, size_t serverinfo_length); # ifndef OPENSSL_NO_STDIO int SSL_CTX_use_serverinfo_file(SSL_CTX *ctx, const char *file); # endif /* NO_STDIO */ # endif # ifndef OPENSSL_NO_STDIO int SSL_use_RSAPrivateKey_file(SSL *ssl, const char *file, int type); int SSL_use_PrivateKey_file(SSL *ssl, const char *file, int type); int SSL_use_certificate_file(SSL *ssl, const char *file, int type); int SSL_CTX_use_RSAPrivateKey_file(SSL_CTX *ctx, const char *file, int type); int SSL_CTX_use_PrivateKey_file(SSL_CTX *ctx, const char *file, int type); int SSL_CTX_use_certificate_file(SSL_CTX *ctx, const char *file, int type); /* PEM type */ int SSL_CTX_use_certificate_chain_file(SSL_CTX *ctx, const char *file); STACK_OF(X509_NAME) *SSL_load_client_CA_file(const char *file); int SSL_add_file_cert_subjects_to_stack(STACK_OF(X509_NAME) *stackCAs, const char *file); # ifndef OPENSSL_SYS_VMS /* XXXXX: Better scheme needed! [was: #ifndef MAC_OS_pre_X] */ # ifndef OPENSSL_SYS_MACINTOSH_CLASSIC int SSL_add_dir_cert_subjects_to_stack(STACK_OF(X509_NAME) *stackCAs, const char *dir); # endif # endif # endif void SSL_load_error_strings(void); const char *SSL_state_string(const SSL *s); const char *SSL_rstate_string(const SSL *s); const char *SSL_state_string_long(const SSL *s); const char *SSL_rstate_string_long(const SSL *s); long SSL_SESSION_get_time(const SSL_SESSION *s); long SSL_SESSION_set_time(SSL_SESSION *s, long t); long SSL_SESSION_get_timeout(const SSL_SESSION *s); long SSL_SESSION_set_timeout(SSL_SESSION *s, long t); void SSL_copy_session_id(SSL *to, const SSL *from); X509 *SSL_SESSION_get0_peer(SSL_SESSION *s); int SSL_SESSION_set1_id_context(SSL_SESSION *s, const unsigned char *sid_ctx, unsigned int sid_ctx_len); SSL_SESSION *SSL_SESSION_new(void); const unsigned char *SSL_SESSION_get_id(const SSL_SESSION *s, unsigned int *len); unsigned int SSL_SESSION_get_compress_id(const SSL_SESSION *s); # ifndef OPENSSL_NO_FP_API int SSL_SESSION_print_fp(FILE *fp, const SSL_SESSION *ses); # endif # ifndef OPENSSL_NO_BIO int SSL_SESSION_print(BIO *fp, const SSL_SESSION *ses); # endif void SSL_SESSION_free(SSL_SESSION *ses); int i2d_SSL_SESSION(SSL_SESSION *in, unsigned char **pp); int SSL_set_session(SSL *to, SSL_SESSION *session); int SSL_CTX_add_session(SSL_CTX *s, SSL_SESSION *c); int SSL_CTX_remove_session(SSL_CTX *, SSL_SESSION *c); int SSL_CTX_set_generate_session_id(SSL_CTX *, GEN_SESSION_CB); int SSL_set_generate_session_id(SSL *, GEN_SESSION_CB); int SSL_has_matching_session_id(const SSL *ssl, const unsigned char *id, unsigned int id_len); SSL_SESSION *d2i_SSL_SESSION(SSL_SESSION **a, const unsigned char **pp, long length); # ifdef HEADER_X509_H X509 *SSL_get_peer_certificate(const SSL *s); # endif STACK_OF(X509) *SSL_get_peer_cert_chain(const SSL *s); int SSL_CTX_get_verify_mode(const SSL_CTX *ctx); int SSL_CTX_get_verify_depth(const SSL_CTX *ctx); int (*SSL_CTX_get_verify_callback(const SSL_CTX *ctx)) (int, X509_STORE_CTX *); void SSL_CTX_set_verify(SSL_CTX *ctx, int mode, int (*callback) (int, X509_STORE_CTX *)); void SSL_CTX_set_verify_depth(SSL_CTX *ctx, int depth); void SSL_CTX_set_cert_verify_callback(SSL_CTX *ctx, int (*cb) (X509_STORE_CTX *, void *), void *arg); void SSL_CTX_set_cert_cb(SSL_CTX *c, int (*cb) (SSL *ssl, void *arg), void *arg); # ifndef OPENSSL_NO_RSA int SSL_CTX_use_RSAPrivateKey(SSL_CTX *ctx, RSA *rsa); # endif int SSL_CTX_use_RSAPrivateKey_ASN1(SSL_CTX *ctx, const unsigned char *d, long len); int SSL_CTX_use_PrivateKey(SSL_CTX *ctx, EVP_PKEY *pkey); int SSL_CTX_use_PrivateKey_ASN1(int pk, SSL_CTX *ctx, const unsigned char *d, long len); int SSL_CTX_use_certificate(SSL_CTX *ctx, X509 *x); int SSL_CTX_use_certificate_ASN1(SSL_CTX *ctx, int len, const unsigned char *d); void SSL_CTX_set_default_passwd_cb(SSL_CTX *ctx, pem_password_cb *cb); void SSL_CTX_set_default_passwd_cb_userdata(SSL_CTX *ctx, void *u); int SSL_CTX_check_private_key(const SSL_CTX *ctx); int SSL_check_private_key(const SSL *ctx); int SSL_CTX_set_session_id_context(SSL_CTX *ctx, const unsigned char *sid_ctx, unsigned int sid_ctx_len); SSL *SSL_new(SSL_CTX *ctx); int SSL_set_session_id_context(SSL *ssl, const unsigned char *sid_ctx, unsigned int sid_ctx_len); int SSL_CTX_set_purpose(SSL_CTX *s, int purpose); int SSL_set_purpose(SSL *s, int purpose); int SSL_CTX_set_trust(SSL_CTX *s, int trust); int SSL_set_trust(SSL *s, int trust); int SSL_CTX_set1_param(SSL_CTX *ctx, X509_VERIFY_PARAM *vpm); int SSL_set1_param(SSL *ssl, X509_VERIFY_PARAM *vpm); X509_VERIFY_PARAM *SSL_CTX_get0_param(SSL_CTX *ctx); X509_VERIFY_PARAM *SSL_get0_param(SSL *ssl); void SSL_certs_clear(SSL *s); void SSL_free(SSL *ssl); int SSL_accept(SSL *ssl); int SSL_connect(SSL *ssl); int SSL_read(SSL *ssl, void *buf, int num); int SSL_peek(SSL *ssl, void *buf, int num); int SSL_write(SSL *ssl, const void *buf, int num); long SSL_ctrl(SSL *ssl, int cmd, long larg, void *parg); long SSL_callback_ctrl(SSL *, int, void (*)(void)); long SSL_CTX_ctrl(SSL_CTX *ctx, int cmd, long larg, void *parg); long SSL_CTX_callback_ctrl(SSL_CTX *, int, void (*)(void)); int SSL_get_error(const SSL *s, int ret_code); const char *SSL_get_version(const SSL *s); /* This sets the 'default' SSL version that SSL_new() will create */ int SSL_CTX_set_ssl_version(SSL_CTX *ctx, const SSL_METHOD *meth); # ifndef OPENSSL_NO_SSL2_METHOD const SSL_METHOD *SSLv2_method(void); /* SSLv2 */ const SSL_METHOD *SSLv2_server_method(void); /* SSLv2 */ const SSL_METHOD *SSLv2_client_method(void); /* SSLv2 */ # endif # ifndef OPENSSL_NO_SSL3_METHOD const SSL_METHOD *SSLv3_method(void); /* SSLv3 */ const SSL_METHOD *SSLv3_server_method(void); /* SSLv3 */ const SSL_METHOD *SSLv3_client_method(void); /* SSLv3 */ # endif const SSL_METHOD *SSLv23_method(void); /* Negotiate highest available SSL/TLS * version */ const SSL_METHOD *SSLv23_server_method(void); /* Negotiate highest available * SSL/TLS version */ const SSL_METHOD *SSLv23_client_method(void); /* Negotiate highest available * SSL/TLS version */ const SSL_METHOD *TLSv1_method(void); /* TLSv1.0 */ const SSL_METHOD *TLSv1_server_method(void); /* TLSv1.0 */ const SSL_METHOD *TLSv1_client_method(void); /* TLSv1.0 */ const SSL_METHOD *TLSv1_1_method(void); /* TLSv1.1 */ const SSL_METHOD *TLSv1_1_server_method(void); /* TLSv1.1 */ const SSL_METHOD *TLSv1_1_client_method(void); /* TLSv1.1 */ const SSL_METHOD *TLSv1_2_method(void); /* TLSv1.2 */ const SSL_METHOD *TLSv1_2_server_method(void); /* TLSv1.2 */ const SSL_METHOD *TLSv1_2_client_method(void); /* TLSv1.2 */ const SSL_METHOD *DTLSv1_method(void); /* DTLSv1.0 */ const SSL_METHOD *DTLSv1_server_method(void); /* DTLSv1.0 */ const SSL_METHOD *DTLSv1_client_method(void); /* DTLSv1.0 */ const SSL_METHOD *DTLSv1_2_method(void); /* DTLSv1.2 */ const SSL_METHOD *DTLSv1_2_server_method(void); /* DTLSv1.2 */ const SSL_METHOD *DTLSv1_2_client_method(void); /* DTLSv1.2 */ const SSL_METHOD *DTLS_method(void); /* DTLS 1.0 and 1.2 */ const SSL_METHOD *DTLS_server_method(void); /* DTLS 1.0 and 1.2 */ const SSL_METHOD *DTLS_client_method(void); /* DTLS 1.0 and 1.2 */ STACK_OF(SSL_CIPHER) *SSL_get_ciphers(const SSL *s); int SSL_do_handshake(SSL *s); int SSL_renegotiate(SSL *s); int SSL_renegotiate_abbreviated(SSL *s); int SSL_renegotiate_pending(SSL *s); int SSL_shutdown(SSL *s); const SSL_METHOD *SSL_CTX_get_ssl_method(SSL_CTX *ctx); const SSL_METHOD *SSL_get_ssl_method(SSL *s); int SSL_set_ssl_method(SSL *s, const SSL_METHOD *method); const char *SSL_alert_type_string_long(int value); const char *SSL_alert_type_string(int value); const char *SSL_alert_desc_string_long(int value); const char *SSL_alert_desc_string(int value); void SSL_set_client_CA_list(SSL *s, STACK_OF(X509_NAME) *name_list); void SSL_CTX_set_client_CA_list(SSL_CTX *ctx, STACK_OF(X509_NAME) *name_list); STACK_OF(X509_NAME) *SSL_get_client_CA_list(const SSL *s); STACK_OF(X509_NAME) *SSL_CTX_get_client_CA_list(const SSL_CTX *s); int SSL_add_client_CA(SSL *ssl, X509 *x); int SSL_CTX_add_client_CA(SSL_CTX *ctx, X509 *x); void SSL_set_connect_state(SSL *s); void SSL_set_accept_state(SSL *s); long SSL_get_default_timeout(const SSL *s); int SSL_library_init(void); char *SSL_CIPHER_description(const SSL_CIPHER *, char *buf, int size); STACK_OF(X509_NAME) *SSL_dup_CA_list(STACK_OF(X509_NAME) *sk); SSL *SSL_dup(SSL *ssl); X509 *SSL_get_certificate(const SSL *ssl); /* * EVP_PKEY */ struct evp_pkey_st *SSL_get_privatekey(const SSL *ssl); X509 *SSL_CTX_get0_certificate(const SSL_CTX *ctx); EVP_PKEY *SSL_CTX_get0_privatekey(const SSL_CTX *ctx); void SSL_CTX_set_quiet_shutdown(SSL_CTX *ctx, int mode); int SSL_CTX_get_quiet_shutdown(const SSL_CTX *ctx); void SSL_set_quiet_shutdown(SSL *ssl, int mode); int SSL_get_quiet_shutdown(const SSL *ssl); void SSL_set_shutdown(SSL *ssl, int mode); int SSL_get_shutdown(const SSL *ssl); int SSL_version(const SSL *ssl); int SSL_CTX_set_default_verify_paths(SSL_CTX *ctx); int SSL_CTX_load_verify_locations(SSL_CTX *ctx, const char *CAfile, const char *CApath); # define SSL_get0_session SSL_get_session/* just peek at pointer */ SSL_SESSION *SSL_get_session(const SSL *ssl); SSL_SESSION *SSL_get1_session(SSL *ssl); /* obtain a reference count */ SSL_CTX *SSL_get_SSL_CTX(const SSL *ssl); SSL_CTX *SSL_set_SSL_CTX(SSL *ssl, SSL_CTX *ctx); void SSL_set_info_callback(SSL *ssl, void (*cb) (const SSL *ssl, int type, int val)); void (*SSL_get_info_callback(const SSL *ssl)) (const SSL *ssl, int type, int val); int SSL_state(const SSL *ssl); void SSL_set_state(SSL *ssl, int state); void SSL_set_verify_result(SSL *ssl, long v); long SSL_get_verify_result(const SSL *ssl); int SSL_set_ex_data(SSL *ssl, int idx, void *data); void *SSL_get_ex_data(const SSL *ssl, int idx); int SSL_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func, CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); int SSL_SESSION_set_ex_data(SSL_SESSION *ss, int idx, void *data); void *SSL_SESSION_get_ex_data(const SSL_SESSION *ss, int idx); int SSL_SESSION_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func, CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); int SSL_CTX_set_ex_data(SSL_CTX *ssl, int idx, void *data); void *SSL_CTX_get_ex_data(const SSL_CTX *ssl, int idx); int SSL_CTX_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func, CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); int SSL_get_ex_data_X509_STORE_CTX_idx(void); # define SSL_CTX_sess_set_cache_size(ctx,t) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_SESS_CACHE_SIZE,t,NULL) # define SSL_CTX_sess_get_cache_size(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_GET_SESS_CACHE_SIZE,0,NULL) # define SSL_CTX_set_session_cache_mode(ctx,m) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_SESS_CACHE_MODE,m,NULL) # define SSL_CTX_get_session_cache_mode(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_GET_SESS_CACHE_MODE,0,NULL) # define SSL_CTX_get_default_read_ahead(ctx) SSL_CTX_get_read_ahead(ctx) # define SSL_CTX_set_default_read_ahead(ctx,m) SSL_CTX_set_read_ahead(ctx,m) # define SSL_CTX_get_read_ahead(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_GET_READ_AHEAD,0,NULL) # define SSL_CTX_set_read_ahead(ctx,m) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_READ_AHEAD,m,NULL) # define SSL_CTX_get_max_cert_list(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_GET_MAX_CERT_LIST,0,NULL) # define SSL_CTX_set_max_cert_list(ctx,m) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_MAX_CERT_LIST,m,NULL) # define SSL_get_max_cert_list(ssl) \ SSL_ctrl(ssl,SSL_CTRL_GET_MAX_CERT_LIST,0,NULL) # define SSL_set_max_cert_list(ssl,m) \ SSL_ctrl(ssl,SSL_CTRL_SET_MAX_CERT_LIST,m,NULL) # define SSL_CTX_set_max_send_fragment(ctx,m) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_MAX_SEND_FRAGMENT,m,NULL) # define SSL_set_max_send_fragment(ssl,m) \ SSL_ctrl(ssl,SSL_CTRL_SET_MAX_SEND_FRAGMENT,m,NULL) /* NB: the keylength is only applicable when is_export is true */ # ifndef OPENSSL_NO_RSA void SSL_CTX_set_tmp_rsa_callback(SSL_CTX *ctx, RSA *(*cb) (SSL *ssl, int is_export, int keylength)); void SSL_set_tmp_rsa_callback(SSL *ssl, RSA *(*cb) (SSL *ssl, int is_export, int keylength)); # endif # ifndef OPENSSL_NO_DH void SSL_CTX_set_tmp_dh_callback(SSL_CTX *ctx, DH *(*dh) (SSL *ssl, int is_export, int keylength)); void SSL_set_tmp_dh_callback(SSL *ssl, DH *(*dh) (SSL *ssl, int is_export, int keylength)); # endif # ifndef OPENSSL_NO_ECDH void SSL_CTX_set_tmp_ecdh_callback(SSL_CTX *ctx, EC_KEY *(*ecdh) (SSL *ssl, int is_export, int keylength)); void SSL_set_tmp_ecdh_callback(SSL *ssl, EC_KEY *(*ecdh) (SSL *ssl, int is_export, int keylength)); # endif const COMP_METHOD *SSL_get_current_compression(SSL *s); const COMP_METHOD *SSL_get_current_expansion(SSL *s); const char *SSL_COMP_get_name(const COMP_METHOD *comp); STACK_OF(SSL_COMP) *SSL_COMP_get_compression_methods(void); STACK_OF(SSL_COMP) *SSL_COMP_set0_compression_methods(STACK_OF(SSL_COMP) *meths); void SSL_COMP_free_compression_methods(void); int SSL_COMP_add_compression_method(int id, COMP_METHOD *cm); const SSL_CIPHER *SSL_CIPHER_find(SSL *ssl, const unsigned char *ptr); /* TLS extensions functions */ int SSL_set_session_ticket_ext(SSL *s, void *ext_data, int ext_len); int SSL_set_session_ticket_ext_cb(SSL *s, tls_session_ticket_ext_cb_fn cb, void *arg); /* Pre-shared secret session resumption functions */ int SSL_set_session_secret_cb(SSL *s, tls_session_secret_cb_fn tls_session_secret_cb, void *arg); void SSL_set_debug(SSL *s, int debug); int SSL_cache_hit(SSL *s); int SSL_is_server(SSL *s); SSL_CONF_CTX *SSL_CONF_CTX_new(void); int SSL_CONF_CTX_finish(SSL_CONF_CTX *cctx); void SSL_CONF_CTX_free(SSL_CONF_CTX *cctx); unsigned int SSL_CONF_CTX_set_flags(SSL_CONF_CTX *cctx, unsigned int flags); unsigned int SSL_CONF_CTX_clear_flags(SSL_CONF_CTX *cctx, unsigned int flags); int SSL_CONF_CTX_set1_prefix(SSL_CONF_CTX *cctx, const char *pre); void SSL_CONF_CTX_set_ssl(SSL_CONF_CTX *cctx, SSL *ssl); void SSL_CONF_CTX_set_ssl_ctx(SSL_CONF_CTX *cctx, SSL_CTX *ctx); int SSL_CONF_cmd(SSL_CONF_CTX *cctx, const char *cmd, const char *value); int SSL_CONF_cmd_argv(SSL_CONF_CTX *cctx, int *pargc, char ***pargv); int SSL_CONF_cmd_value_type(SSL_CONF_CTX *cctx, const char *cmd); # ifndef OPENSSL_NO_SSL_TRACE void SSL_trace(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg); const char *SSL_CIPHER_standard_name(const SSL_CIPHER *c); # endif # ifndef OPENSSL_NO_UNIT_TEST const struct openssl_ssl_test_functions *SSL_test_functions(void); # endif /* BEGIN ERROR CODES */ /* * The following lines are auto generated by the script mkerr.pl. Any changes * made after this point may be overwritten when the script is next run. */ void ERR_load_SSL_strings(void); /* Error codes for the SSL functions. */ /* Function codes. */ # define SSL_F_CHECK_SUITEB_CIPHER_LIST 331 # define SSL_F_CLIENT_CERTIFICATE 100 # define SSL_F_CLIENT_FINISHED 167 # define SSL_F_CLIENT_HELLO 101 # define SSL_F_CLIENT_MASTER_KEY 102 # define SSL_F_D2I_SSL_SESSION 103 # define SSL_F_DO_DTLS1_WRITE 245 # define SSL_F_DO_SSL3_WRITE 104 # define SSL_F_DTLS1_ACCEPT 246 # define SSL_F_DTLS1_ADD_CERT_TO_BUF 295 # define SSL_F_DTLS1_BUFFER_RECORD 247 # define SSL_F_DTLS1_CHECK_TIMEOUT_NUM 316 # define SSL_F_DTLS1_CLIENT_HELLO 248 # define SSL_F_DTLS1_CONNECT 249 # define SSL_F_DTLS1_ENC 250 # define SSL_F_DTLS1_GET_HELLO_VERIFY 251 # define SSL_F_DTLS1_GET_MESSAGE 252 # define SSL_F_DTLS1_GET_MESSAGE_FRAGMENT 253 # define SSL_F_DTLS1_GET_RECORD 254 # define SSL_F_DTLS1_HANDLE_TIMEOUT 297 # define SSL_F_DTLS1_HEARTBEAT 305 # define SSL_F_DTLS1_OUTPUT_CERT_CHAIN 255 # define SSL_F_DTLS1_PREPROCESS_FRAGMENT 288 # define SSL_F_DTLS1_PROCESS_BUFFERED_RECORDS 424 # define SSL_F_DTLS1_PROCESS_OUT_OF_SEQ_MESSAGE 256 # define SSL_F_DTLS1_PROCESS_RECORD 257 # define SSL_F_DTLS1_READ_BYTES 258 # define SSL_F_DTLS1_READ_FAILED 259 # define SSL_F_DTLS1_SEND_CERTIFICATE_REQUEST 260 # define SSL_F_DTLS1_SEND_CLIENT_CERTIFICATE 261 # define SSL_F_DTLS1_SEND_CLIENT_KEY_EXCHANGE 262 # define SSL_F_DTLS1_SEND_CLIENT_VERIFY 263 # define SSL_F_DTLS1_SEND_HELLO_VERIFY_REQUEST 264 # define SSL_F_DTLS1_SEND_SERVER_CERTIFICATE 265 # define SSL_F_DTLS1_SEND_SERVER_HELLO 266 # define SSL_F_DTLS1_SEND_SERVER_KEY_EXCHANGE 267 # define SSL_F_DTLS1_WRITE_APP_DATA_BYTES 268 # define SSL_F_GET_CLIENT_FINISHED 105 # define SSL_F_GET_CLIENT_HELLO 106 # define SSL_F_GET_CLIENT_MASTER_KEY 107 # define SSL_F_GET_SERVER_FINISHED 108 # define SSL_F_GET_SERVER_HELLO 109 # define SSL_F_GET_SERVER_STATIC_DH_KEY 340 # define SSL_F_GET_SERVER_VERIFY 110 # define SSL_F_I2D_SSL_SESSION 111 # define SSL_F_READ_N 112 # define SSL_F_REQUEST_CERTIFICATE 113 # define SSL_F_SERVER_FINISH 239 # define SSL_F_SERVER_HELLO 114 # define SSL_F_SERVER_VERIFY 240 # define SSL_F_SSL23_ACCEPT 115 # define SSL_F_SSL23_CLIENT_HELLO 116 # define SSL_F_SSL23_CONNECT 117 # define SSL_F_SSL23_GET_CLIENT_HELLO 118 # define SSL_F_SSL23_GET_SERVER_HELLO 119 # define SSL_F_SSL23_PEEK 237 # define SSL_F_SSL23_READ 120 # define SSL_F_SSL23_WRITE 121 # define SSL_F_SSL2_ACCEPT 122 # define SSL_F_SSL2_CONNECT 123 # define SSL_F_SSL2_ENC_INIT 124 # define SSL_F_SSL2_GENERATE_KEY_MATERIAL 241 # define SSL_F_SSL2_PEEK 234 # define SSL_F_SSL2_READ 125 # define SSL_F_SSL2_READ_INTERNAL 236 # define SSL_F_SSL2_SET_CERTIFICATE 126 # define SSL_F_SSL2_WRITE 127 # define SSL_F_SSL3_ACCEPT 128 # define SSL_F_SSL3_ADD_CERT_TO_BUF 296 # define SSL_F_SSL3_CALLBACK_CTRL 233 # define SSL_F_SSL3_CHANGE_CIPHER_STATE 129 # define SSL_F_SSL3_CHECK_CERT_AND_ALGORITHM 130 # define SSL_F_SSL3_CHECK_CLIENT_HELLO 304 # define SSL_F_SSL3_CHECK_FINISHED 339 # define SSL_F_SSL3_CLIENT_HELLO 131 # define SSL_F_SSL3_CONNECT 132 # define SSL_F_SSL3_CTRL 213 # define SSL_F_SSL3_CTX_CTRL 133 # define SSL_F_SSL3_DIGEST_CACHED_RECORDS 293 # define SSL_F_SSL3_DO_CHANGE_CIPHER_SPEC 292 # define SSL_F_SSL3_ENC 134 # define SSL_F_SSL3_GENERATE_KEY_BLOCK 238 # define SSL_F_SSL3_GENERATE_MASTER_SECRET 388 # define SSL_F_SSL3_GET_CERTIFICATE_REQUEST 135 # define SSL_F_SSL3_GET_CERT_STATUS 289 # define SSL_F_SSL3_GET_CERT_VERIFY 136 # define SSL_F_SSL3_GET_CLIENT_CERTIFICATE 137 # define SSL_F_SSL3_GET_CLIENT_HELLO 138 # define SSL_F_SSL3_GET_CLIENT_KEY_EXCHANGE 139 # define SSL_F_SSL3_GET_FINISHED 140 # define SSL_F_SSL3_GET_KEY_EXCHANGE 141 # define SSL_F_SSL3_GET_MESSAGE 142 # define SSL_F_SSL3_GET_NEW_SESSION_TICKET 283 # define SSL_F_SSL3_GET_NEXT_PROTO 306 # define SSL_F_SSL3_GET_RECORD 143 # define SSL_F_SSL3_GET_SERVER_CERTIFICATE 144 # define SSL_F_SSL3_GET_SERVER_DONE 145 # define SSL_F_SSL3_GET_SERVER_HELLO 146 # define SSL_F_SSL3_HANDSHAKE_MAC 285 # define SSL_F_SSL3_NEW_SESSION_TICKET 287 # define SSL_F_SSL3_OUTPUT_CERT_CHAIN 147 # define SSL_F_SSL3_PEEK 235 # define SSL_F_SSL3_READ_BYTES 148 # define SSL_F_SSL3_READ_N 149 # define SSL_F_SSL3_SEND_CERTIFICATE_REQUEST 150 # define SSL_F_SSL3_SEND_CLIENT_CERTIFICATE 151 # define SSL_F_SSL3_SEND_CLIENT_KEY_EXCHANGE 152 # define SSL_F_SSL3_SEND_CLIENT_VERIFY 153 # define SSL_F_SSL3_SEND_SERVER_CERTIFICATE 154 # define SSL_F_SSL3_SEND_SERVER_HELLO 242 # define SSL_F_SSL3_SEND_SERVER_KEY_EXCHANGE 155 # define SSL_F_SSL3_SETUP_KEY_BLOCK 157 # define SSL_F_SSL3_SETUP_READ_BUFFER 156 # define SSL_F_SSL3_SETUP_WRITE_BUFFER 291 # define SSL_F_SSL3_WRITE_BYTES 158 # define SSL_F_SSL3_WRITE_PENDING 159 # define SSL_F_SSL_ADD_CERT_CHAIN 318 # define SSL_F_SSL_ADD_CERT_TO_BUF 319 # define SSL_F_SSL_ADD_CLIENTHELLO_RENEGOTIATE_EXT 298 # define SSL_F_SSL_ADD_CLIENTHELLO_TLSEXT 277 # define SSL_F_SSL_ADD_CLIENTHELLO_USE_SRTP_EXT 307 # define SSL_F_SSL_ADD_DIR_CERT_SUBJECTS_TO_STACK 215 # define SSL_F_SSL_ADD_FILE_CERT_SUBJECTS_TO_STACK 216 # define SSL_F_SSL_ADD_SERVERHELLO_RENEGOTIATE_EXT 299 # define SSL_F_SSL_ADD_SERVERHELLO_TLSEXT 278 # define SSL_F_SSL_ADD_SERVERHELLO_USE_SRTP_EXT 308 # define SSL_F_SSL_BAD_METHOD 160 # define SSL_F_SSL_BUILD_CERT_CHAIN 332 # define SSL_F_SSL_BYTES_TO_CIPHER_LIST 161 # define SSL_F_SSL_CERT_DUP 221 # define SSL_F_SSL_CERT_INST 222 # define SSL_F_SSL_CERT_INSTANTIATE 214 # define SSL_F_SSL_CERT_NEW 162 # define SSL_F_SSL_CHECK_PRIVATE_KEY 163 # define SSL_F_SSL_CHECK_SERVERHELLO_TLSEXT 280 # define SSL_F_SSL_CHECK_SRVR_ECC_CERT_AND_ALG 279 # define SSL_F_SSL_CIPHER_PROCESS_RULESTR 230 # define SSL_F_SSL_CIPHER_STRENGTH_SORT 231 # define SSL_F_SSL_CLEAR 164 # define SSL_F_SSL_COMP_ADD_COMPRESSION_METHOD 165 # define SSL_F_SSL_CONF_CMD 334 # define SSL_F_SSL_CREATE_CIPHER_LIST 166 # define SSL_F_SSL_CTRL 232 # define SSL_F_SSL_CTX_CHECK_PRIVATE_KEY 168 # define SSL_F_SSL_CTX_MAKE_PROFILES 309 # define SSL_F_SSL_CTX_NEW 169 # define SSL_F_SSL_CTX_SET_CIPHER_LIST 269 # define SSL_F_SSL_CTX_SET_CLIENT_CERT_ENGINE 290 # define SSL_F_SSL_CTX_SET_PURPOSE 226 # define SSL_F_SSL_CTX_SET_SESSION_ID_CONTEXT 219 # define SSL_F_SSL_CTX_SET_SSL_VERSION 170 # define SSL_F_SSL_CTX_SET_TRUST 229 # define SSL_F_SSL_CTX_USE_CERTIFICATE 171 # define SSL_F_SSL_CTX_USE_CERTIFICATE_ASN1 172 # define SSL_F_SSL_CTX_USE_CERTIFICATE_CHAIN_FILE 220 # define SSL_F_SSL_CTX_USE_CERTIFICATE_FILE 173 # define SSL_F_SSL_CTX_USE_PRIVATEKEY 174 # define SSL_F_SSL_CTX_USE_PRIVATEKEY_ASN1 175 # define SSL_F_SSL_CTX_USE_PRIVATEKEY_FILE 176 # define SSL_F_SSL_CTX_USE_PSK_IDENTITY_HINT 272 # define SSL_F_SSL_CTX_USE_RSAPRIVATEKEY 177 # define SSL_F_SSL_CTX_USE_RSAPRIVATEKEY_ASN1 178 # define SSL_F_SSL_CTX_USE_RSAPRIVATEKEY_FILE 179 # define SSL_F_SSL_CTX_USE_SERVERINFO 336 # define SSL_F_SSL_CTX_USE_SERVERINFO_FILE 337 # define SSL_F_SSL_DO_HANDSHAKE 180 # define SSL_F_SSL_GET_NEW_SESSION 181 # define SSL_F_SSL_GET_PREV_SESSION 217 # define SSL_F_SSL_GET_SERVER_CERT_INDEX 322 # define SSL_F_SSL_GET_SERVER_SEND_CERT 182 # define SSL_F_SSL_GET_SERVER_SEND_PKEY 317 # define SSL_F_SSL_GET_SIGN_PKEY 183 # define SSL_F_SSL_INIT_WBIO_BUFFER 184 # define SSL_F_SSL_LOAD_CLIENT_CA_FILE 185 # define SSL_F_SSL_NEW 186 # define SSL_F_SSL_PARSE_CLIENTHELLO_RENEGOTIATE_EXT 300 # define SSL_F_SSL_PARSE_CLIENTHELLO_TLSEXT 302 # define SSL_F_SSL_PARSE_CLIENTHELLO_USE_SRTP_EXT 310 # define SSL_F_SSL_PARSE_SERVERHELLO_RENEGOTIATE_EXT 301 # define SSL_F_SSL_PARSE_SERVERHELLO_TLSEXT 303 # define SSL_F_SSL_PARSE_SERVERHELLO_USE_SRTP_EXT 311 # define SSL_F_SSL_PEEK 270 # define SSL_F_SSL_PREPARE_CLIENTHELLO_TLSEXT 281 # define SSL_F_SSL_PREPARE_SERVERHELLO_TLSEXT 282 # define SSL_F_SSL_READ 223 # define SSL_F_SSL_RSA_PRIVATE_DECRYPT 187 # define SSL_F_SSL_RSA_PUBLIC_ENCRYPT 188 # define SSL_F_SSL_SCAN_CLIENTHELLO_TLSEXT 320 # define SSL_F_SSL_SCAN_SERVERHELLO_TLSEXT 321 # define SSL_F_SSL_SESSION_DUP 348 # define SSL_F_SSL_SESSION_NEW 189 # define SSL_F_SSL_SESSION_PRINT_FP 190 # define SSL_F_SSL_SESSION_SET1_ID_CONTEXT 312 # define SSL_F_SSL_SESS_CERT_NEW 225 # define SSL_F_SSL_SET_CERT 191 # define SSL_F_SSL_SET_CIPHER_LIST 271 # define SSL_F_SSL_SET_FD 192 # define SSL_F_SSL_SET_PKEY 193 # define SSL_F_SSL_SET_PURPOSE 227 # define SSL_F_SSL_SET_RFD 194 # define SSL_F_SSL_SET_SESSION 195 # define SSL_F_SSL_SET_SESSION_ID_CONTEXT 218 # define SSL_F_SSL_SET_SESSION_TICKET_EXT 294 # define SSL_F_SSL_SET_TRUST 228 # define SSL_F_SSL_SET_WFD 196 # define SSL_F_SSL_SHUTDOWN 224 # define SSL_F_SSL_SRP_CTX_INIT 313 # define SSL_F_SSL_UNDEFINED_CONST_FUNCTION 243 # define SSL_F_SSL_UNDEFINED_FUNCTION 197 # define SSL_F_SSL_UNDEFINED_VOID_FUNCTION 244 # define SSL_F_SSL_USE_CERTIFICATE 198 # define SSL_F_SSL_USE_CERTIFICATE_ASN1 199 # define SSL_F_SSL_USE_CERTIFICATE_FILE 200 # define SSL_F_SSL_USE_PRIVATEKEY 201 # define SSL_F_SSL_USE_PRIVATEKEY_ASN1 202 # define SSL_F_SSL_USE_PRIVATEKEY_FILE 203 # define SSL_F_SSL_USE_PSK_IDENTITY_HINT 273 # define SSL_F_SSL_USE_RSAPRIVATEKEY 204 # define SSL_F_SSL_USE_RSAPRIVATEKEY_ASN1 205 # define SSL_F_SSL_USE_RSAPRIVATEKEY_FILE 206 # define SSL_F_SSL_VERIFY_CERT_CHAIN 207 # define SSL_F_SSL_WRITE 208 # define SSL_F_TLS12_CHECK_PEER_SIGALG 333 # define SSL_F_TLS1_CERT_VERIFY_MAC 286 # define SSL_F_TLS1_CHANGE_CIPHER_STATE 209 # define SSL_F_TLS1_CHECK_SERVERHELLO_TLSEXT 274 # define SSL_F_TLS1_ENC 210 # define SSL_F_TLS1_EXPORT_KEYING_MATERIAL 314 # define SSL_F_TLS1_GET_CURVELIST 338 # define SSL_F_TLS1_HEARTBEAT 315 # define SSL_F_TLS1_PREPARE_CLIENTHELLO_TLSEXT 275 # define SSL_F_TLS1_PREPARE_SERVERHELLO_TLSEXT 276 # define SSL_F_TLS1_PRF 284 # define SSL_F_TLS1_SETUP_KEY_BLOCK 211 # define SSL_F_TLS1_SET_SERVER_SIGALGS 335 # define SSL_F_WRITE_PENDING 212 /* Reason codes. */ # define SSL_R_APP_DATA_IN_HANDSHAKE 100 # define SSL_R_ATTEMPT_TO_REUSE_SESSION_IN_DIFFERENT_CONTEXT 272 # define SSL_R_BAD_ALERT_RECORD 101 # define SSL_R_BAD_AUTHENTICATION_TYPE 102 # define SSL_R_BAD_CHANGE_CIPHER_SPEC 103 # define SSL_R_BAD_CHECKSUM 104 # define SSL_R_BAD_DATA 390 # define SSL_R_BAD_DATA_RETURNED_BY_CALLBACK 106 # define SSL_R_BAD_DECOMPRESSION 107 # define SSL_R_BAD_DH_G_LENGTH 108 # define SSL_R_BAD_DH_G_VALUE 375 # define SSL_R_BAD_DH_PUB_KEY_LENGTH 109 # define SSL_R_BAD_DH_PUB_KEY_VALUE 393 # define SSL_R_BAD_DH_P_LENGTH 110 # define SSL_R_BAD_DH_P_VALUE 395 # define SSL_R_BAD_DIGEST_LENGTH 111 # define SSL_R_BAD_DSA_SIGNATURE 112 # define SSL_R_BAD_ECC_CERT 304 # define SSL_R_BAD_ECDSA_SIGNATURE 305 # define SSL_R_BAD_ECPOINT 306 # define SSL_R_BAD_HANDSHAKE_LENGTH 332 # define SSL_R_BAD_HELLO_REQUEST 105 # define SSL_R_BAD_LENGTH 271 # define SSL_R_BAD_MAC_DECODE 113 # define SSL_R_BAD_MAC_LENGTH 333 # define SSL_R_BAD_MESSAGE_TYPE 114 # define SSL_R_BAD_PACKET_LENGTH 115 # define SSL_R_BAD_PROTOCOL_VERSION_NUMBER 116 # define SSL_R_BAD_PSK_IDENTITY_HINT_LENGTH 316 # define SSL_R_BAD_RESPONSE_ARGUMENT 117 # define SSL_R_BAD_RSA_DECRYPT 118 # define SSL_R_BAD_RSA_ENCRYPT 119 # define SSL_R_BAD_RSA_E_LENGTH 120 # define SSL_R_BAD_RSA_MODULUS_LENGTH 121 # define SSL_R_BAD_RSA_SIGNATURE 122 # define SSL_R_BAD_SIGNATURE 123 # define SSL_R_BAD_SRP_A_LENGTH 347 # define SSL_R_BAD_SRP_B_LENGTH 348 # define SSL_R_BAD_SRP_G_LENGTH 349 # define SSL_R_BAD_SRP_N_LENGTH 350 # define SSL_R_BAD_SRP_PARAMETERS 371 # define SSL_R_BAD_SRP_S_LENGTH 351 # define SSL_R_BAD_SRTP_MKI_VALUE 352 # define SSL_R_BAD_SRTP_PROTECTION_PROFILE_LIST 353 # define SSL_R_BAD_SSL_FILETYPE 124 # define SSL_R_BAD_SSL_SESSION_ID_LENGTH 125 # define SSL_R_BAD_STATE 126 # define SSL_R_BAD_VALUE 384 # define SSL_R_BAD_WRITE_RETRY 127 # define SSL_R_BIO_NOT_SET 128 # define SSL_R_BLOCK_CIPHER_PAD_IS_WRONG 129 # define SSL_R_BN_LIB 130 # define SSL_R_CA_DN_LENGTH_MISMATCH 131 # define SSL_R_CA_DN_TOO_LONG 132 # define SSL_R_CCS_RECEIVED_EARLY 133 # define SSL_R_CERTIFICATE_VERIFY_FAILED 134 # define SSL_R_CERT_CB_ERROR 377 # define SSL_R_CERT_LENGTH_MISMATCH 135 # define SSL_R_CHALLENGE_IS_DIFFERENT 136 # define SSL_R_CIPHER_CODE_WRONG_LENGTH 137 # define SSL_R_CIPHER_OR_HASH_UNAVAILABLE 138 # define SSL_R_CIPHER_TABLE_SRC_ERROR 139 # define SSL_R_CLIENTHELLO_TLSEXT 226 # define SSL_R_COMPRESSED_LENGTH_TOO_LONG 140 # define SSL_R_COMPRESSION_DISABLED 343 # define SSL_R_COMPRESSION_FAILURE 141 # define SSL_R_COMPRESSION_ID_NOT_WITHIN_PRIVATE_RANGE 307 # define SSL_R_COMPRESSION_LIBRARY_ERROR 142 # define SSL_R_CONNECTION_ID_IS_DIFFERENT 143 # define SSL_R_CONNECTION_TYPE_NOT_SET 144 # define SSL_R_COOKIE_MISMATCH 308 # define SSL_R_DATA_BETWEEN_CCS_AND_FINISHED 145 # define SSL_R_DATA_LENGTH_TOO_LONG 146 # define SSL_R_DECRYPTION_FAILED 147 # define SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC 281 # define SSL_R_DH_KEY_TOO_SMALL 372 # define SSL_R_DH_PUBLIC_VALUE_LENGTH_IS_WRONG 148 # define SSL_R_DIGEST_CHECK_FAILED 149 # define SSL_R_DTLS_MESSAGE_TOO_BIG 334 # define SSL_R_DUPLICATE_COMPRESSION_ID 309 # define SSL_R_ECC_CERT_NOT_FOR_KEY_AGREEMENT 317 # define SSL_R_ECC_CERT_NOT_FOR_SIGNING 318 # define SSL_R_ECC_CERT_SHOULD_HAVE_RSA_SIGNATURE 322 # define SSL_R_ECC_CERT_SHOULD_HAVE_SHA1_SIGNATURE 323 # define SSL_R_ECDH_REQUIRED_FOR_SUITEB_MODE 374 # define SSL_R_ECGROUP_TOO_LARGE_FOR_CIPHER 310 # define SSL_R_EMPTY_SRTP_PROTECTION_PROFILE_LIST 354 # define SSL_R_ENCRYPTED_LENGTH_TOO_LONG 150 # define SSL_R_ERROR_GENERATING_TMP_RSA_KEY 282 # define SSL_R_ERROR_IN_RECEIVED_CIPHER_LIST 151 # define SSL_R_EXCESSIVE_MESSAGE_SIZE 152 # define SSL_R_EXTRA_DATA_IN_MESSAGE 153 # define SSL_R_GOT_A_FIN_BEFORE_A_CCS 154 # define SSL_R_GOT_NEXT_PROTO_BEFORE_A_CCS 355 # define SSL_R_GOT_NEXT_PROTO_WITHOUT_EXTENSION 356 # define SSL_R_HTTPS_PROXY_REQUEST 155 # define SSL_R_HTTP_REQUEST 156 # define SSL_R_ILLEGAL_PADDING 283 # define SSL_R_ILLEGAL_SUITEB_DIGEST 380 # define SSL_R_INAPPROPRIATE_FALLBACK 373 # define SSL_R_INCONSISTENT_COMPRESSION 340 # define SSL_R_INVALID_CHALLENGE_LENGTH 158 # define SSL_R_INVALID_COMMAND 280 # define SSL_R_INVALID_COMPRESSION_ALGORITHM 341 # define SSL_R_INVALID_NULL_CMD_NAME 385 # define SSL_R_INVALID_PURPOSE 278 # define SSL_R_INVALID_SERVERINFO_DATA 388 # define SSL_R_INVALID_SRP_USERNAME 357 # define SSL_R_INVALID_STATUS_RESPONSE 328 # define SSL_R_INVALID_TICKET_KEYS_LENGTH 325 # define SSL_R_INVALID_TRUST 279 # define SSL_R_KEY_ARG_TOO_LONG 284 # define SSL_R_KRB5 285 # define SSL_R_KRB5_C_CC_PRINC 286 # define SSL_R_KRB5_C_GET_CRED 287 # define SSL_R_KRB5_C_INIT 288 # define SSL_R_KRB5_C_MK_REQ 289 # define SSL_R_KRB5_S_BAD_TICKET 290 # define SSL_R_KRB5_S_INIT 291 # define SSL_R_KRB5_S_RD_REQ 292 # define SSL_R_KRB5_S_TKT_EXPIRED 293 # define SSL_R_KRB5_S_TKT_NYV 294 # define SSL_R_KRB5_S_TKT_SKEW 295 # define SSL_R_LENGTH_MISMATCH 159 # define SSL_R_LENGTH_TOO_SHORT 160 # define SSL_R_LIBRARY_BUG 274 # define SSL_R_LIBRARY_HAS_NO_CIPHERS 161 # define SSL_R_MESSAGE_TOO_LONG 296 # define SSL_R_MISSING_DH_DSA_CERT 162 # define SSL_R_MISSING_DH_KEY 163 # define SSL_R_MISSING_DH_RSA_CERT 164 # define SSL_R_MISSING_DSA_SIGNING_CERT 165 # define SSL_R_MISSING_ECDH_CERT 382 # define SSL_R_MISSING_ECDSA_SIGNING_CERT 381 # define SSL_R_MISSING_EXPORT_TMP_DH_KEY 166 # define SSL_R_MISSING_EXPORT_TMP_RSA_KEY 167 # define SSL_R_MISSING_RSA_CERTIFICATE 168 # define SSL_R_MISSING_RSA_ENCRYPTING_CERT 169 # define SSL_R_MISSING_RSA_SIGNING_CERT 170 # define SSL_R_MISSING_SRP_PARAM 358 # define SSL_R_MISSING_TMP_DH_KEY 171 # define SSL_R_MISSING_TMP_ECDH_KEY 311 # define SSL_R_MISSING_TMP_RSA_KEY 172 # define SSL_R_MISSING_TMP_RSA_PKEY 173 # define SSL_R_MISSING_VERIFY_MESSAGE 174 # define SSL_R_MULTIPLE_SGC_RESTARTS 346 # define SSL_R_NON_SSLV2_INITIAL_PACKET 175 # define SSL_R_NO_CERTIFICATES_RETURNED 176 # define SSL_R_NO_CERTIFICATE_ASSIGNED 177 # define SSL_R_NO_CERTIFICATE_RETURNED 178 # define SSL_R_NO_CERTIFICATE_SET 179 # define SSL_R_NO_CERTIFICATE_SPECIFIED 180 # define SSL_R_NO_CIPHERS_AVAILABLE 181 # define SSL_R_NO_CIPHERS_PASSED 182 # define SSL_R_NO_CIPHERS_SPECIFIED 183 # define SSL_R_NO_CIPHER_LIST 184 # define SSL_R_NO_CIPHER_MATCH 185 # define SSL_R_NO_CLIENT_CERT_METHOD 331 # define SSL_R_NO_CLIENT_CERT_RECEIVED 186 # define SSL_R_NO_COMPRESSION_SPECIFIED 187 # define SSL_R_NO_GOST_CERTIFICATE_SENT_BY_PEER 330 # define SSL_R_NO_METHOD_SPECIFIED 188 # define SSL_R_NO_PEM_EXTENSIONS 389 # define SSL_R_NO_PRIVATEKEY 189 # define SSL_R_NO_PRIVATE_KEY_ASSIGNED 190 # define SSL_R_NO_PROTOCOLS_AVAILABLE 191 # define SSL_R_NO_PUBLICKEY 192 # define SSL_R_NO_RENEGOTIATION 339 # define SSL_R_NO_REQUIRED_DIGEST 324 # define SSL_R_NO_SHARED_CIPHER 193 # define SSL_R_NO_SHARED_SIGATURE_ALGORITHMS 376 # define SSL_R_NO_SRTP_PROFILES 359 # define SSL_R_NO_VERIFY_CALLBACK 194 # define SSL_R_NULL_SSL_CTX 195 # define SSL_R_NULL_SSL_METHOD_PASSED 196 # define SSL_R_OLD_SESSION_CIPHER_NOT_RETURNED 197 # define SSL_R_OLD_SESSION_COMPRESSION_ALGORITHM_NOT_RETURNED 344 # define SSL_R_ONLY_DTLS_1_2_ALLOWED_IN_SUITEB_MODE 387 # define SSL_R_ONLY_TLS_1_2_ALLOWED_IN_SUITEB_MODE 379 # define SSL_R_ONLY_TLS_ALLOWED_IN_FIPS_MODE 297 # define SSL_R_OPAQUE_PRF_INPUT_TOO_LONG 327 # define SSL_R_PACKET_LENGTH_TOO_LONG 198 # define SSL_R_PARSE_TLSEXT 227 # define SSL_R_PATH_TOO_LONG 270 # define SSL_R_PEER_DID_NOT_RETURN_A_CERTIFICATE 199 # define SSL_R_PEER_ERROR 200 # define SSL_R_PEER_ERROR_CERTIFICATE 201 # define SSL_R_PEER_ERROR_NO_CERTIFICATE 202 # define SSL_R_PEER_ERROR_NO_CIPHER 203 # define SSL_R_PEER_ERROR_UNSUPPORTED_CERTIFICATE_TYPE 204 # define SSL_R_PEM_NAME_BAD_PREFIX 391 # define SSL_R_PEM_NAME_TOO_SHORT 392 # define SSL_R_PRE_MAC_LENGTH_TOO_LONG 205 # define SSL_R_PROBLEMS_MAPPING_CIPHER_FUNCTIONS 206 # define SSL_R_PROTOCOL_IS_SHUTDOWN 207 # define SSL_R_PSK_IDENTITY_NOT_FOUND 223 # define SSL_R_PSK_NO_CLIENT_CB 224 # define SSL_R_PSK_NO_SERVER_CB 225 # define SSL_R_PUBLIC_KEY_ENCRYPT_ERROR 208 # define SSL_R_PUBLIC_KEY_IS_NOT_RSA 209 # define SSL_R_PUBLIC_KEY_NOT_RSA 210 # define SSL_R_READ_BIO_NOT_SET 211 # define SSL_R_READ_TIMEOUT_EXPIRED 312 # define SSL_R_READ_WRONG_PACKET_TYPE 212 # define SSL_R_RECORD_LENGTH_MISMATCH 213 # define SSL_R_RECORD_TOO_LARGE 214 # define SSL_R_RECORD_TOO_SMALL 298 # define SSL_R_RENEGOTIATE_EXT_TOO_LONG 335 # define SSL_R_RENEGOTIATION_ENCODING_ERR 336 # define SSL_R_RENEGOTIATION_MISMATCH 337 # define SSL_R_REQUIRED_CIPHER_MISSING 215 # define SSL_R_REQUIRED_COMPRESSSION_ALGORITHM_MISSING 342 # define SSL_R_REUSE_CERT_LENGTH_NOT_ZERO 216 # define SSL_R_REUSE_CERT_TYPE_NOT_ZERO 217 # define SSL_R_REUSE_CIPHER_LIST_NOT_ZERO 218 # define SSL_R_SCSV_RECEIVED_WHEN_RENEGOTIATING 345 # define SSL_R_SERVERHELLO_TLSEXT 275 # define SSL_R_SESSION_ID_CONTEXT_UNINITIALIZED 277 # define SSL_R_SHORT_READ 219 # define SSL_R_SHUTDOWN_WHILE_IN_INIT 407 # define SSL_R_SIGNATURE_ALGORITHMS_ERROR 360 # define SSL_R_SIGNATURE_FOR_NON_SIGNING_CERTIFICATE 220 # define SSL_R_SRP_A_CALC 361 # define SSL_R_SRTP_COULD_NOT_ALLOCATE_PROFILES 362 # define SSL_R_SRTP_PROTECTION_PROFILE_LIST_TOO_LONG 363 # define SSL_R_SRTP_UNKNOWN_PROTECTION_PROFILE 364 # define SSL_R_SSL23_DOING_SESSION_ID_REUSE 221 # define SSL_R_SSL2_CONNECTION_ID_TOO_LONG 299 # define SSL_R_SSL3_EXT_INVALID_ECPOINTFORMAT 321 # define SSL_R_SSL3_EXT_INVALID_SERVERNAME 319 # define SSL_R_SSL3_EXT_INVALID_SERVERNAME_TYPE 320 # define SSL_R_SSL3_SESSION_ID_TOO_LONG 300 # define SSL_R_SSL3_SESSION_ID_TOO_SHORT 222 # define SSL_R_SSLV3_ALERT_BAD_CERTIFICATE 1042 # define SSL_R_SSLV3_ALERT_BAD_RECORD_MAC 1020 # define SSL_R_SSLV3_ALERT_CERTIFICATE_EXPIRED 1045 # define SSL_R_SSLV3_ALERT_CERTIFICATE_REVOKED 1044 # define SSL_R_SSLV3_ALERT_CERTIFICATE_UNKNOWN 1046 # define SSL_R_SSLV3_ALERT_DECOMPRESSION_FAILURE 1030 # define SSL_R_SSLV3_ALERT_HANDSHAKE_FAILURE 1040 # define SSL_R_SSLV3_ALERT_ILLEGAL_PARAMETER 1047 # define SSL_R_SSLV3_ALERT_NO_CERTIFICATE 1041 # define SSL_R_SSLV3_ALERT_UNEXPECTED_MESSAGE 1010 # define SSL_R_SSLV3_ALERT_UNSUPPORTED_CERTIFICATE 1043 # define SSL_R_SSL_CTX_HAS_NO_DEFAULT_SSL_VERSION 228 # define SSL_R_SSL_HANDSHAKE_FAILURE 229 # define SSL_R_SSL_LIBRARY_HAS_NO_CIPHERS 230 # define SSL_R_SSL_SESSION_ID_CALLBACK_FAILED 301 # define SSL_R_SSL_SESSION_ID_CONFLICT 302 # define SSL_R_SSL_SESSION_ID_CONTEXT_TOO_LONG 273 # define SSL_R_SSL_SESSION_ID_HAS_BAD_LENGTH 303 # define SSL_R_SSL_SESSION_ID_IS_DIFFERENT 231 # define SSL_R_TLSV1_ALERT_ACCESS_DENIED 1049 # define SSL_R_TLSV1_ALERT_DECODE_ERROR 1050 # define SSL_R_TLSV1_ALERT_DECRYPTION_FAILED 1021 # define SSL_R_TLSV1_ALERT_DECRYPT_ERROR 1051 # define SSL_R_TLSV1_ALERT_EXPORT_RESTRICTION 1060 # define SSL_R_TLSV1_ALERT_INAPPROPRIATE_FALLBACK 1086 # define SSL_R_TLSV1_ALERT_INSUFFICIENT_SECURITY 1071 # define SSL_R_TLSV1_ALERT_INTERNAL_ERROR 1080 # define SSL_R_TLSV1_ALERT_NO_RENEGOTIATION 1100 # define SSL_R_TLSV1_ALERT_PROTOCOL_VERSION 1070 # define SSL_R_TLSV1_ALERT_RECORD_OVERFLOW 1022 # define SSL_R_TLSV1_ALERT_UNKNOWN_CA 1048 # define SSL_R_TLSV1_ALERT_USER_CANCELLED 1090 # define SSL_R_TLSV1_BAD_CERTIFICATE_HASH_VALUE 1114 # define SSL_R_TLSV1_BAD_CERTIFICATE_STATUS_RESPONSE 1113 # define SSL_R_TLSV1_CERTIFICATE_UNOBTAINABLE 1111 # define SSL_R_TLSV1_UNRECOGNIZED_NAME 1112 # define SSL_R_TLSV1_UNSUPPORTED_EXTENSION 1110 # define SSL_R_TLS_CLIENT_CERT_REQ_WITH_ANON_CIPHER 232 # define SSL_R_TLS_HEARTBEAT_PEER_DOESNT_ACCEPT 365 # define SSL_R_TLS_HEARTBEAT_PENDING 366 # define SSL_R_TLS_ILLEGAL_EXPORTER_LABEL 367 # define SSL_R_TLS_INVALID_ECPOINTFORMAT_LIST 157 # define SSL_R_TLS_PEER_DID_NOT_RESPOND_WITH_CERTIFICATE_LIST 233 # define SSL_R_TLS_RSA_ENCRYPTED_VALUE_LENGTH_IS_WRONG 234 # define SSL_R_TOO_MANY_WARN_ALERTS 409 # define SSL_R_TRIED_TO_USE_UNSUPPORTED_CIPHER 235 # define SSL_R_UNABLE_TO_DECODE_DH_CERTS 236 # define SSL_R_UNABLE_TO_DECODE_ECDH_CERTS 313 # define SSL_R_UNABLE_TO_EXTRACT_PUBLIC_KEY 237 # define SSL_R_UNABLE_TO_FIND_DH_PARAMETERS 238 # define SSL_R_UNABLE_TO_FIND_ECDH_PARAMETERS 314 # define SSL_R_UNABLE_TO_FIND_PUBLIC_KEY_PARAMETERS 239 # define SSL_R_UNABLE_TO_FIND_SSL_METHOD 240 # define SSL_R_UNABLE_TO_LOAD_SSL2_MD5_ROUTINES 241 # define SSL_R_UNABLE_TO_LOAD_SSL3_MD5_ROUTINES 242 # define SSL_R_UNABLE_TO_LOAD_SSL3_SHA1_ROUTINES 243 # define SSL_R_UNEXPECTED_MESSAGE 244 # define SSL_R_UNEXPECTED_RECORD 245 # define SSL_R_UNINITIALIZED 276 # define SSL_R_UNKNOWN_ALERT_TYPE 246 # define SSL_R_UNKNOWN_CERTIFICATE_TYPE 247 # define SSL_R_UNKNOWN_CIPHER_RETURNED 248 # define SSL_R_UNKNOWN_CIPHER_TYPE 249 # define SSL_R_UNKNOWN_CMD_NAME 386 # define SSL_R_UNKNOWN_DIGEST 368 # define SSL_R_UNKNOWN_KEY_EXCHANGE_TYPE 250 # define SSL_R_UNKNOWN_PKEY_TYPE 251 # define SSL_R_UNKNOWN_PROTOCOL 252 # define SSL_R_UNKNOWN_REMOTE_ERROR_TYPE 253 # define SSL_R_UNKNOWN_SSL_VERSION 254 # define SSL_R_UNKNOWN_STATE 255 # define SSL_R_UNSAFE_LEGACY_RENEGOTIATION_DISABLED 338 # define SSL_R_UNSUPPORTED_CIPHER 256 # define SSL_R_UNSUPPORTED_COMPRESSION_ALGORITHM 257 # define SSL_R_UNSUPPORTED_DIGEST_TYPE 326 # define SSL_R_UNSUPPORTED_ELLIPTIC_CURVE 315 # define SSL_R_UNSUPPORTED_PROTOCOL 258 # define SSL_R_UNSUPPORTED_SSL_VERSION 259 # define SSL_R_UNSUPPORTED_STATUS_TYPE 329 # define SSL_R_USE_SRTP_NOT_NEGOTIATED 369 # define SSL_R_WRITE_BIO_NOT_SET 260 # define SSL_R_WRONG_CERTIFICATE_TYPE 383 # define SSL_R_WRONG_CIPHER_RETURNED 261 # define SSL_R_WRONG_CURVE 378 # define SSL_R_WRONG_MESSAGE_TYPE 262 # define SSL_R_WRONG_NUMBER_OF_KEY_BITS 263 # define SSL_R_WRONG_SIGNATURE_LENGTH 264 # define SSL_R_WRONG_SIGNATURE_SIZE 265 # define SSL_R_WRONG_SIGNATURE_TYPE 370 # define SSL_R_WRONG_SSL_VERSION 266 # define SSL_R_WRONG_VERSION_NUMBER 267 # define SSL_R_X509_LIB 268 # define SSL_R_X509_VERIFICATION_SETUP_PROBLEMS 269 #ifdef __cplusplus } #endif #endif